Name: SilentWind PRO SW12 Bluetooth wind turbine
Brand: Silentwind
Rating: 5 (2 reviews)

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 04/30/24

⚡️ Get up to €500 back on your SIMRAD or B&G equipment ⏰ From 01/04/2024 to 31/05/2024.

-€239.10

⭐️ Best Seller

The Silentwind PRO wind turbine has been designed for marine quality. It features top-of-the-range resistant materials and high performance. Suitable for all weather conditions, the wind turbine features Boost and Stop functions for better control of your energy production.

SILENTWIND - WIND GENERATOR PRO - ECOLOGICAL AND SILENT

The Silentwind wind turbine is equipped with a magnet generator, discreet carbon blades and a hybrid regulator that can accommodate solar panels. This generation of wind turbines is innovative, safe, efficient, lightweight and silent at all wind speeds. It will enable you to optimize your on-board electrical energy.

Please note that the connection cable between the wind turbine and the regulator is not supplied: you'll need to provide a cable of the length of your choice.


	PRO WIND TURBINE The wind turbine lets you optimize your energy thanks to its 400-watt permanent magnet generator. It's easy to start up, thanks to reduced inertia from a wind speed of 2 m/second. You can use it in light, medium and strong winds without being disturbed by its noise. Power and load are regulated by an external hybrid solar/wind MPPT controller, with multifunction display, automatic and manual electronic stop switch and temperature sensor.

ULTRA-RESISTANT BLADES The wind turbine's blades are made from 100% hand-laminated carbon fiber, and are engineered for minimal vibration during operation. They are highly resistant to both sun and wind, and have been tested at hurricane speeds of 120 km/h, with a rotation of 5480 rpm approaching the speed of the sound barrier at the tip of the blades.

	STOP FUNCTION The SILENTWIND wind turbine stops automatically when the battery is charged, or the rotation speed is significantly reduced to switch to charge-holding mode. In this way, only sufficient energy is used for the battery and self-discharge is avoided. The wind turbine can be stopped manually using the buttons below the display, or via a remote control button connected to the appropriate port. An LED indicator confirms that the Stop function has been activated.

HYBRID MPPT CONTROLLER The controller on your Silentwind wind turbine is now connected to your smartphone or tablet. Thanks to its Bluetooth connectivity, you can control and optimize the charge of your wind turbine and solar panels. Boost function Voltage: 12 - 24V Multifunction display + LED Dimensions: 220 x 150 x 82 mm Solar power capacity: 300W Wind power capacity: 600W 2 x 10 A user outputs - Consumption / 20mA Operates with batteries: Acid, Gel, AGM, Lithium

Nominal voltage	12 or 24Vdc	Number of blades	3
Rated power	400 watts	Blade weight	150g per blade
Rated wind speed	14.0 m/second	Rotation range	550 - 1700 Upm (rpm)
Start-up wind speed	2.2 m/second	Output current	Three-phase
Load start	3 m/second	Generator weight	6.8 kg
Indicator light	Blue LED under generator	Warranty	36 months
Rotor diameter	1.15 meters