LED switch with integrated flap management Bennett

Name: LED switch with integrated flap management Bennett
Brand: Bennett

This LED switch, indicating the position of your flaps in real time, allows you to easily manage the inclination of your Bennett BOLT electric flaps.

If the bow is high on the port side, press the " BOW DOWN " port (port) control.
If the bow is low on port, press the starboard " BOW UP " control
... And vice versa for starboard and the " BOW UP " control.

Use only short pulses to allow the boat to react and avoid lowering the bow too much.

BENNETT- LED FLAP SWITCH - INTUITIVE FLAP MANAGEMENT

To control your Bolt Bennett 12v electric flaps, the bennett LED flap switch will be your best asset. 2 buttons to independently adjust your flaps and 2 ALL UP and ALL DN buttons to fully lower and raise your flaps at the same time.


	MOUNTING AND DIMENSIONS The BE713 switch for Bolt flaps Bennett requires a 4.41cm diameter hole and a depth of 5.08cm for flush mounting. This switch has the control unit directly integrated into the housing, resulting in a space-saving, easy-to-install keypad.

HOW DOES THE SWITCH WORK? The switch is fitted with LEDs, so that the driver always knows at what height the shovels are positioned. The keypad has 2 switches. Pressing the top right or left switch will lower the port (left) or starboard (right) bow. While pressing the bottom of the right switch will raise the starboard bow, pressing the bottom of the left switch will lower the port bow. 2 other buttons, named ALL UP and ALL DN, allow the flaps to be lowered or raised completely with a single press. Finally, the 2 practical buttons at the top (moon and sun symbols) adjust the intensity of the LEDs, so you won't be dazzled at night.

	ASSEMBLY AND WIRING As the control unit is integrated into the keypad, this flap switch is extremely easy to plug in : simply connect the flap extensions to the switch's Plug and Play cables. No additional management interface is required.