Compact Magnum cooling unit with flat evaporator

Name: Compact Magnum cooling unit with flat evaporator
Brand: Indel Webasto

The Compact Magnum 2513 water-cooled refrigeration unit maintains low temperatures and preserves food and beverages on your boat.

It works like a conventional refrigerator, cooling a space up to 260 L in volume, such as a crate, box or hermetically sealed compartment.

INDEL WEBASTO - Compact Magnum 2513 chiller with 260 L flat evaporator

The Compact Magnum 2513 chiller Indel Webasto with 260 L water cooling consists of 3 inseparable components : a compressor, a flat evaporator and a thermostat .

The choice of your cooling unit will depend on a number of criteria: the location of the cooler, the positioning of the cooling unit (flat or on a wall), the available dimensions, accessibility to the system for maintenance, and the volume to be cooled .

All these criteria are essential to ensure optimum chiller efficiency and an installation tailored to your needs.

The Compact Magnum chiller with flat evaporator is available in two versions to best suit your needs:

IG161 ➔ Compact Magnum 2513 chiller with 260 L flat evaporator

IG162 ➔ Compact Magnum 2507 chiller with 400 L flat evaporator


	WATER FOR COOLING This type of water-cooled chiller is particularly versatile in terms of installation location, as there's no need for a well-ventilated space to cool the system. It's also quieter than air-cooled systems, as it doesn't need a fan to run and remove heat. The system is cooled by a pump that draws in seawater , enabling lower temperatures to be achieved than with ambient air inside the boat. The flat evaporator can be installed against the sides of the future refrigerator. Ideal for small spaces.

AN INFINITE REFRIGERATION CYCLE The Compact Magnum 2513 refrigeration unit is specifically designed to be powered by seawater. Here's how the system works The system draws in seawater through an intake located beneath the boat's hull The usually gaseous refrigerant is compressed in the compressor. This increases its pressure and temperature The refrigerant circulates through a condenser, releasing its heat into the seawater previously drawn in . The refrigerant changes from a gas to a liquid. The refrigerant passes through an expansion valve where its pressure drops, cooling its temperature. It then becomes a very cold, low-pressure mixture of liquid and gas This mixture circulates through the evaporator , which absorbs heat from the compartment, cooling the space. As it absorbs heat, the refrigerant evaporates, reverting to a low-pressure gas The cycle starts again when the compressor sucks in the gaseous refrigerant These steps are perpetually repeated to cool your food. The seawater used for condensation is generally discharged outside the boat after absorbing heat from the refrigerant.

SPECIFICATIONS MAGNUM 2513 COMPACT WATER-COOLED CHILLER 260 L

Maximum cooling volume	260 L
Maximum storage volume	86 L
Evaporator type	flat
Compressor type	BD50 F
Weight	14 kg
Evaporator dimensions LxW	1000 x 270 mm
Compressor dimensions WxHxD	330 x 160 x 175 mm
Maximum power consumption	6 A
Average power consumption	1,1 A
Thermostat type	Combi (refrigeration + preservation)