-€79.10

Kit flaps inox 12V pour moteur hors-bord

Name: Kit flaps inox 12V pour moteur hors-bord
Brand: Lectrotab

The 12V stainless steel flaps kit for outboard motor-230x305 mm with LED switch will enable you to improve your boat's stability, correct its trim and reduce your fuel consumption.

Its stainless steel shovels resist corrosion, while the two electric cylinders provide maximum lifting force to enable the shovels to reach their full potential on your boat.

LECTROTAB - Kit flaps inox 12V pour hors-bord 230x305 MM + commutateur LED

The 12V stainless steel flap kit for outboard-offers strength and performance for your boat. The cylinders and scoops combine silent electric operation with no risk of oil leaks.

This kit allows you to adjust the inclination of your boat according to its speed and weight. This will prevent the bow from lifting too much or the stern from sinking too far into the water.


	STAINLESS-STEEL SHOVELS Both 304 stainless steel shovels are 2.65 mm thick and corrosion-resistant. The scoops are manufactured with a continuous rolled and pinned hinge, so no welding is required. Here, the stabilizing shovels are 230 mm long and 305 mm wide. To help you choose the flap model best suited to your boat, please consult our dedicated table.

STANDARD 12V ELECTRIC CYLINDERS The two standard 12V electric cylinders are highly reliable, ensuring precise, optimum operation of the shovels. The cylinder is enclosed in a non-metallic housing. It also features double O-rings to prevent water infiltration. There's also a valve and ventilation system, which balances pressure during use.

	LED SLC SWITCH-11 The SLC-11 LED switch supplied in the kit lets you control your flaps and make the most of them. It also enables a wide range of actions on your flaps, including : indicates flap position in real time a single button to control shovels up and down move both flaps at the same time automatic return to previous flap position It's also fully waterproof and UV-resistant, and requires no external electronic box. Thanks to its SLC- NMEA adapter (not supplied), the joystick is compatible with the NMEA2000 network.