- -€168.70
The extremely lightweight Mass Systemswitch operates as a connection point in the 230 V on-board electrical system, with four integrated outputs . It guarantees safety and enhances overall comfort .
Read more FeaturesData sheet
- Number of inputs
- 3
- Number of outputs
- 4
- Input voltage
- 230V
MASTERVOLT - MASS SYSTEMSWITCH 230V
The automatic AC transfer switch makes it possible to connect three different sources of electricity (converter, mains or generator) to three or four AC power units.
The Mass Systemswitch switching system is MasterBus compatible, enabling all information, such as load current and inverter status , to be read on devices such as the MasterView display .
LED indications allow basic functions to be read on the display , such as the indication of available power (genset, shore, inverter), as well as the "charge on inverter " function .
CONTROL YOUR DEVICE REMOTELYWith the EasyView 5 display , you can control your Mass Systemswitch , indicating alternating current , current and frequency with the "load on inverter " mode. In addition, the 12/24V readout shows current, power (charge/discharge) and battery monitoring , and features a generator start/stop function . Mass Systemswitch switching is managed by intelligent electronics to avoid overloading the equipment. Its two-pole relay is also robust and highly reliable . |
|
MASS SYSTEMSWITCH 230V SPECIFICATIONS
GENERAL SPECIFICATIONS | |
Nominal input voltage | 230V (50-60 Hz) |
Input voltage range | 200-250 V |
Number of inputs | 3 |
Number of outputs | 4 |
Dimensions, HxWxD | 340 x 261 x 144mm |
Weight | 5 kg |
TECHNICAL SPECIFICATIONS | |
Remote control connection | yes |
LED indication on housing | indication of voltage sources and "load on inverter" mode |
Rated group input current | 63 A |
Rated mains input current | 40 A |
Rated inverter input current | 25 A |
Earth leakage protection | not |
Genset input switch | voltage and frequency monitoring |
Group input delay | 0-10 sec (adjustable) |
Shortbreak output current rating | 25 A |
Power output current rating | 40 A |
Group output current rating | 63 A |
Automatic circuit breakers | no, depending on system |
Power consumption (all AC inputs) | 33W |
Power consumption (convert power only) | |
Switching time | on 12-22 ms / off 4-19 ms |
Temperature range (specified) | -5° C to 60° C |
Temperature range (ambient temp) | -25°C to 70°C |
Temperature range (storage/non-operating) | -60°C to 80°C |
Relative humidity | max 95% (non-condensing) |
Frequency monitoring | yes |
Cable cross-section | 0.5-10mm²/AWG 20-7, remote control 0.14-2.5 mm²/AWG 26-13 |
Protection class | IP23 |
MAIN POINTS :
|
BOX CONTENTS :
|
Customer Reviews (0)
Questions / Answers