SilentWind PRO SW12 Bluetooth Wind Turbine

PRO WIND POWER

The wind turbine allows you to optimize your energy thanks to its permanent magnet generator with a power of 400 Watts.

Its start-up is easy thanks to a reduced inertia from a wind speed of 2 m/second.

You can use it in light, medium and strong winds without being disturbed by its noise.

The power and load regulation is done by an external hybrid solar/wind MPPT controller, with multifunction display, automatic and manual electronic shutdown switch and temperature sensor.

ULTRA-RESISTANT BLADES

The blades of the wind turbine are made of 100% hand-laminated carbon fiber and worked for minimal vibration during operation.

They are very resistant to the sun but also to the wind, they have been tested at a hurricane speed of 120 km/h with a rotation of 5480 revolutions/mm approaching the speed of the sound barrier at the tip of the blades.

STOP FUNCTION

The SILENTWIND wind turbine stops automatically when the battery is charged, or the speed is significantly reduced to switch to charge-holding mode.

This way, only enough energy is used for the battery and self-discharge is avoided.

The wind turbine can be stopped manually using the buttons below the display and also by a remote control button connected to the port provided for this purpose. An LED indicator confirms that the Stop function is activated.

HYBRID MPPT CONTROLLER

The controller of your Silentwind wind turbine is now connected to your smartphone or tablet. Thanks to its Bluetooth connectivity you will be able to control and optimize the charge of your wind turbine and your solar panels.

• Boost function
• Voltage: 12 - 24V
• Multifunction display + LED
• Dimensions: 220 x 150 x 82 mm
• Solar power capacity: 300W
• Wind power capacity: 600W
• 2 x 10A user outputs - Current consumption / 20mA
• Works with batteries: Acid, Gel, AGM, Lithium

MAIN POINTS :

• Silencer in operation
• Nominal power: 400 Watts
• Nominal wind speed: 14.0 m/sec
• Rotation range: 480 - 1420 Upm (revolutions/mm)
• Can be used anywhere in light, medium or strong winds
• Wind speed for start-up: 2.2 m/second

CONTENTS OF THE BOX :

• 1 - SI-SW Pro wind turbine
• 3 - SPB rotating blades
• 1 - White hub disk
• 1 - Screwing kit M6 complete
• 1 - 600W Bluethooth hybrid charge controller
• 1 - Documentation in PDF