Helix 10 G4N CHIRP MEGA SI+

TRADITIONAL 2D SOUNDER CHIRP

The traditional sounder function uses high-frequency CHIRP coverage on a wider beam than usual, allowing optimum detection down to 100m without any problems.

With CHIRP technology, you benefit from:

• Denser information and a sharper, high-resolution image
• Better target separation and sharper rendering of fish arches
• Improved bottom tracking and fish detection even at high speeds

MEGA DOWN IMAGING+ TECHNOLOGY

The MEGA Imaging+ function takes Down Imaging performance to a new level, doubling the depth of use of the Mega Down Imaging.

You'll now be able to prospect at very high frequencies at depths that were previously inaccessible... while retaining stunning image quality.

Frequencies :

• 455 kHz DI+ (435-535 kHz)
• 800 kHz DI+ (800-860 kHz)
• MEGA DI+ (1100-1200 kHz)

MEGA SIDE IMAGING+ TECHNOLOGY

You can survey up to 60m on either side of the boat, i.e. 120m of Mega Imaging scanning!

Mega Imaging+ lets you use the zoom mode in MSI+ view without loss of detail. You can zoom in up to six times, while maintaining impressive image quality.

Rather than simply zooming in on the image, which distorts the pixels, the device relaunches the calculation on the selected area.

Frequencies :

• 455 kHz SI+ (405-505 kHz)
• 800 kHz SI+ (780-840 kHz)
• MEGA SI+ (1050-1175 kHz)

AUTOCHART LIVE

The AutoChart Live function enables users to map and create bathymetry of any body of water for private use.

The AutoChart Live software is pre-loaded with 8 hours of memory to enable detailed bathymetric mapping of the seabed. This feature now includes the ability to display variations in vegetation and bottom hardness. Maps are created live on-screen as you prospect.

To increase the memory capacity of the AutoChart Live function, the AutoChart card is required.

GPS

The Humminbird Helix 10 is equipped with a state-of-the-art WAAS GPS antenna for high accuracy. This means you'll be able to pinpoint your position with pinpoint accuracy, so you can get the job done.

Simple to use and for reliable navigation, it features an extremely accurate built-in GPS antenna and detailed mapping.

A Micro SD card that can be used to display Navionics+ and SYLMAPS maps.

Please note that the Navigation map is not supplied as standard.

DUAL SPECTRUM PROBE

This multi-frequency, wide-beam probe has a scanning range of 140 to 240khz. It incorporates the best ceramics available. With a very low "Q" factor to protect the ceramics from unnecessary vibration, it delivers the clearest, most accurate image of the water layer.

The narrow beam, which operates at 180-240khz, allows you to optimize bottom detail and readability.

You can also combine the two beams to make the most of both frequency ranges.

This DUAL SPECTRUM technology now equips all Humminbird Helix G4N handsets, as well as DS, MDI & MSI models.

INTERCONNECT YOUR DEVICES

Ethernet networking lets you interconnect Humminbird devices with the greatest of ease.

Devices equipped with this feature can exchange data from the various sensors connected to the network (depth sounder, GPS antenna, radar...).

All data is available on the screens, except for shared cartography.

From 3 devices or accessories, a Network Hub is required.

MAIN POINTS :

• 10" screen
• Bluetooth
• Waterproof IPX7
• NMEA2000 connection
• 1000W RMS power
• 2-year manufacturer's warranty
• Ethernet network compatible
• Screen resolution: 1024 x 600 pixels
• Probe frequencies: 140/240 kHz

BOX CONTENTS :

• 1 - Screen Humminbird Helix 10 G4N MSI+
• 1 - SH transom probe-A107T
• 1 - Protective cover
• 1 - Screen mounting bracket
• 1 - 12V power cord
• 1 - PDF documentation