SOLIX 10 G3 Mega SI+

TRADITIONAL 2D CHIRP SOUNDER

The traditional sounder function uses high-frequency CHIRP coverage on a wider beam than usual, allowing optimum detection down to 100m without any problems.

With CHIRP technology, you benefit from:

• Denser information and a sharper, high-resolution image
• Better target separation and sharper rendering of fish arches
• Improved bottom tracking and fish detection even at high speed

MEGA DOWN IMAGING+ TECHNOLOGY

The new MEGA Imaging+ function takes Down imaging performance to a new level, doubling the depth of use of Mega Down imaging.

You can now explore depths at very high frequencies that were previously inaccessible... while maintaining breathtaking image quality.

MEGA SIDE IMAGING+ TECHNOLOGY

You can now survey up to 60m on either side of the boat, i.e. 120m of Mega Imaging scanning!

Thanks to its new signal processing, Mega imaging+ lets you use the zoom mode in MSI+ view with no loss of detail. You can zoom in up to six times, while maintaining impressive image quality.

Rather than simply zooming in on the image, which distorts the pixels, the device recalculates the selected area.

AUTOCHART LIVE

The AutoChart Live function enables users to map and create bathymetry of any body of water for private use.

The AutoChart Live software is pre-loaded with 8 hours of memory to enable detailed bathymetric mapping of the seabed. This feature now includes the ability to display variations in vegetation and bottom hardness. Maps are created live on-screen as you prospect.

To increase the memory capacity of the AutoChart Live function, the AutoChart card is required.

CUSTOMIZE TO YOUR NEEDS

To make the most of your fishing spots, and depending on the technique you choose, different scenarios may require the use of different technologies. SOLIX makes customization easy.

Drag and drop up to four panes to create customized, predefined views with your most frequently used technologies. Once you've finished building your arsenal, easily switch between pre-sets for the view that best suits your situation on the water.

DUAL SPECTRUM PROBE

This wide-beam, multi-frequency probe has a scanning range of 140 to 240khz. It incorporates the best ceramics available. With a very low "Q" factor to protect the ceramics from unnecessary vibration, it delivers the clearest, most accurate image of the water layer.

The narrow beam operating at 180-240khz allows you to optimize bottom detail and readability. You can also combine the two beams to make the most of both frequency ranges.

This new DUAL SPECTRUM technology now equips all Humminbird SOLIX G3 displays on DS, MDI & MSI models.

GPS

The Humminbird Solix 10 features a latest-generation WAAS GPS antenna for high precision. This means you'll be able to pinpoint your position with pinpoint accuracy, so you can get the job done.

Reliable navigation - Easy to use - Highly accurate built-in GPS antenna and detailed mapping. Micro SD card that can be used to display Navionics+ and SYLMAPS maps.

Please note that the Navigation map is not supplied as standard with the device.

KEY FEATURES :

• Bluetooth
• Waterproof IPX7
• Power: 1000W
• Connection: NMEA2000
• Radar and AIS compatible
• 2-year manufacturer's warranty
• Dimensions: 300 x 200 x 105 mm
• Screen resolution: 1280 x 800 pixels

BOX CONTENTS :

• 1 - SOLIX Humminbird 10.1" TFT screen
• 1 - Protective cover
• 1 - Probe (depending on model)
• 1 - Screen mounting bracket
• 1 - 12V power cord
• 1 - Probe bracket (depending on model)
• 1 - PDF documentation

FREQUENCIES :

• Dual Spectrum
• 455 kHz DI+ (435-535 kHz)
• 455 kHz SI+ (405-505 kHz)
• 800 kHz DI+ (800-860 kHz)
• 800 kHz SI+ (780-840 kHz)
• MEGA DI+ (1000-1300 kHz)
• MEGA SI+ (1000-1300 kHz)