CLIPPER V2 wind vane anemometer

CLIPPER V2 INDICATOR

The Nasa Marine indicator is connected directly to your windvane to give you real-time information on wind speed and direction .

Its ultra-bright 110 x 110 mm analog display allows clear reading and customization of the needle style.

WIND VANE ANEMOMETER

This anemometer wind vane provides apparent wind indications: wind direction over 360°, speed (knots, miles or mph) and speed trend ( acceleration/deceleration ).

Equipped with NMEA 0183 protocol, the wind vane can be linked to your navigation software.

Supplied with a 20-meter cable, lighter and thinner than the previous generation. Even easier to install in your mast.

CLIPPER WINDVANE REPEATER

Connect a second display to your main unit .Withthisrepeater, you can display information from the wind vane anywhere on your boat. It's directly connected to the main display.

Ideal for repeating on another helm station or chart table!

Please note: this repeater can NOT be used as a main display, and must NOT be connected directly to the wind vane.

PACK CONTENTS

• 1 - Clipper V2 display
• 1 - Wind vane
• 1 - 20m cable (wind vane)
• 1 - Protective cover
• 1 - PDF documentation

REPEATER CONTENT

• 1 - Clipper wind vane repeater
• 1 - 5m cable

AERIAL CONTENTS

• 1 - Complete aerial
• 1 - 20m cable