Antifouling kit Protective paint for probes

EASY ANTIFOULING APPLICATION

• 1) Abrasive pad

The abrasive pad prepares the transmitter face and probe housing for Foulfree probe coating.

• 2) XDclean Wipe

XDclean is a probe-safe pre-treatment cleaner. To optimize Foulfree performance, a clean probe is essential. XDclean solution comes pre-packaged with a wipe for easy cleaning.

• 3) Application brush

A small, high-quality brush is included to achieve the best possible result when applying the Foulfree coating.

• 4) Clear Coat

This kit contains 15 ml of Foulfree Clear Coat, a non-toxic topcoat that provides a very smooth outer layer to which marine organisms cannot adhere, allowing your probe to perform at its best.

TIPS AND TOOLS

For better adhesion of Foulfree Transducer Coating to the fairing of plastic probes (polyethylene, polypropylene, nylon, etc.), it may be necessary to use 40-grit sandpaper - NOT included.

⚠️ DO NOT sand the housing or transmitting face of the probe, as this will damage it and void the manufacturer's warranty.

TOOLS REQUIRED :

The Foulfree kit comes with tools included in the box, but you will need additional materials for the application:

• Disposable gloves
• Eye protection
• Clean, dry cloth
• Adhesive tape
• Probe fairing only - 40-grit sandpaper

MAIN POINTS :

• Biocide-free paint
• Certified quality by manufacturers

BOX CONTENTS :

• 1 - Antifouling kit for probe
• 1 - PDF documentation