Earth leakage selector for 2-station installation

Ref. MD993

The 2-station differential selector allows you to switch from one control station to the other on a boat equipped with two dual-function control units . To switch from one control station to the other, both boxes must be set to "STOP ". The selector blocks the box that is not being used , to avoid interference between the two stations.

It is connected to the differential which transmits the movement of the gearbox to the motor . It allows you to select the control unit you really need, depending on the situation .

SEASTAR - Selector switch for reversing differential for 2-station installation

Differentials should be fixed normally to motors and inverters by means of a rigid rod.

If this is not possible, the differentials should be positioned as close as possible to the motors and inverters , and connected by a MORSE 33C or 43C cable.

Maximum recommended cable length is 2.5 m .

NOTE : the selector must be mounted on a reversing differential (see diagram).

Customer Reviews (0)

Your review appreciation cannot be sent