-€18.30

The 2-station differential selector allows you to switch from one control station to the other on a boat equipped with two dual-function control units. To switch from one control station to the other, both boxes must be set to"STOP". The selector blocks the box that is not being used, to avoid interference between the two stations.

It is connected to the differential which transmits the movement of the gearbox to the motor. It allows you to select the control unit you really need, depending on the situation.

SEASTAR - Selector switch for reversing differential for 2-station installation

Differentials should be fixed normally to motors and inverters by means of a rigid rod.

If this is not possible, the differentials should be positioned as close as possible to the motors and inverters, and connected by a MORSE 33C or 43C cable.

Maximum recommended cable length is 2.5 m.

NOTE: the selector must be mounted on a reversing differential (see diagram).

Accessories