Name: GHP Reactor 40 SmartPump v2
Brand: Garmin

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 04/30/24

⚡️ Get up to €500 back on your SIMRAD or B&G equipment ⏰ From 01/04/2024 to 31/05/2024.

-€429.10

The Garmin Reactor40 SmartPump controller-free driver is a autopilot for all types of hydraulic steering, including Vérado systems with electro-assistance.

GARMIN - REACTOR 40 WITH CONTROLLERLESS SMARTPUMP - STAY ON COURSE

Designed for fast motorboats and speedboats, the autopilot Reactor 40 with Smartpump V2 is simply the most responsive ever imagined. With SmartPump V2, there's no need to worry about the ideal pump size for your boat's jack. It adapts to all hydraulic directions and automatically adjusts hydraulic flow from 0 to 2.4 liters / minute according to boat speed.

Another highlight: equipped with a Brushless motor (technology without rotating commutator, and therefore without brushes), this pump offers greater reliability, longer life, reduced power consumption, quieter operation, more compact size, improved thermal performance and greater efficiency.

Connect your chartplotter to autopilot via NMEA2000 for total control. With BlueChart g3 maps on your Garmin chartplotter, you'll benefit from the autoguiding system: automatic tracking of the route created by your GPS. If you don't have a GPS Garmin, you can still connect it via the NMEA2000 or NMEA0183 bus, using the optional 010-11129-00 cable.


THE CCU: THE REACTOR 40'S BRAIN The Course Computer Unit (CCU) is used to determine course and engine speed. With its advanced 9-axis solid-state attitude and heading reference system (AHRS), it offers virtually unlimited mounting possibilities, whatever the orientation. At the same time, this new system considerably reduces heading errors, course deviations, helm movements and power consumption, while providing optimum on-board sailing comfort.

	ELECTRONIC CONTROL UNIT The robust electronic control unit provides reliable and stable power to autopilot. No autopilot spares you the trouble of commissioning and calibration. Aware that electronic equipment shouldn't get in the way of taking to the sea, Garmin has reduced and simplified this step as much as possible. That's the power of simplicity.

SMARTPUMP: AN INTELLIGENT PUMP Ruggedly built in anodized aluminum and nickel-plated steel, the SmartPump v2 pump fits most boats with hydraulic steering systems. The SmartPump v2 is equipped with Intelligent Rudder Travel Technology (IRRT): it slows down the rudder travel when the boat is sailing at high speed, and accelerates it at low speed. The brushless motor eliminates the risk of stalling in the event of software or hardware problems. What's more, La SmartPump automatically adjusts hydraulic flow from 0 to 2.4 liters / minute according to boat speed. SmartPump is compatible with steering cylinders At Garmin, only this autopilot is compatible with the Mercury Verado system.

	SHADOW DRIVE MODULE Take the helm again at any time without having to reactivate your autopilot with the Shadow Drive module. This pilot features patented Shadow Drive technology. When you operate the helm, the system deactivates autopilot itself. You'll be able to maneuver your boat freely. Afterwards, autopilot reactivates itself when your boat returns to a straight course.

REACTOR 40 WIRING KIT Connected to an NMEA0183 or NMEA2000-compatible chartplotter, the autopilot Reactor will follow the programmed route or recorded course perfectly. In addition, with a compatible Garmin chartplotter and G2 Vision, G3 and G3 Vision charts, you can benefit from optional features such as auto guidance, which automatically calculates the best route to take to reach your destination. This kit includes the following items: 1 - ECU power cable 3 - NMEA 2000 T-connectors 1 - NMEA 2000 power cable 2 - NMEA 2000 branch cable (2m) 1 - CCU / ECU interconnection cable (6m) 1 - NMEA 2000 male and female terminations 1- Buzzer: Connect it to the CCU for audible alerts in case of danger.