Name: EV-150 Autopilot Motor
Brand: Raymarine

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 04/30/24

⚡️ Get up to €500 back on your SIMRAD or B&G equipment ⏰ From 01/04/2024 to 31/05/2024.

-€414.10

Designed for motorboats, this Raymarine EV150 autopilot adapts tosailing conditions without any adjustment on the part of the user.

RAYMARINE - EV-150 MOTOR - EVOLUTION TAKES THE HELM

With the Raymarine EV150, you can be sure of precise, safe handling, whatever the boat's speed or sailing conditions. The Evolution EV-150 system uses Raymarine technology to deliver superior autopilot performance for small and medium-sized, hydraulically steered boats, especially those with outboard motors. Suitable for 12 V systems only.


	P70Rs CONTROL PANEL All autopilot information is displayed on this ultra-bright, anti-glare 3.5" LCD screen. Its LightHouse operating system features a simple menu tree. The console also features a central rotary knob and pushbuttons for use in even the most extreme situations. Autopilot information can also be displayed in a variety of formats.

THE EV-1 CENTRAL SENSOR The central sensor is the brain of the EV-400 autopilot. With its 9-axis sensor, it monitors the ship's movements in all three dimensions. Its precision is such that the technology inside the box offers a margin of error of less than 2 degrees, whatever the navigation conditions. Reliable and precise, it constantly monitors heading, pitch, roll and yaw. Depending on weather conditions, it will then enable the autopilot to instantly take account of navigation conditions. It automatically compensates for the ship's magnetic fields. Finally, the EV-1 sensor can be installed anywhere. On or below deck, the housing is hermetically sealed and protects all internal components.

	ACU-150 POWER UNIT The Raymarine ACU-150 is a component of the Evolution autopilot system and is designed to provide power and control to a hydraulic pump. The ACU-150 connects to the SeaTalkng network for communication with its other peripherals.

PACK WITH T1 12V HYDRAULIC PUMP The Type 1 12V hydraulic pump is a power unit designed for boats with 80/230cc hydraulic cylinders. Max. pressure: 50 bar Peak flow: 1000cc/min To perfectly match the hydraulic pump to your boat, you need to know the capacity (in cm3) of the cylinder installed on your boat. To determine cylinder capacity, refer to your helm system documentation, or check directly on the cylinder label. This pump is available in pack T70330.

	SEATALK NG WIRING KIT This kit includes the following items: 2 - SeaTalk terminations 2 - SeaTalk T-connectors 1 - Power cable (0.4m) 1 - SeaTalk main cable (5m) 1 - SeaTalk branch cable (0.4m) 1 - SeaTalk 5-pin terminal block

Caution:

Always take into account the total displacement of the fully loaded boat. This weight is often 20% higher than the displacement of the light boat. Make sure you don't select a driver that will constantly work at the limit of its capabilities. If you select your pilot with safety in mind, he'll remain operational in bad weather.