Polyethylene tarpaulin 6 x 50 m

Polyethylene tarpaulin to protect boats in winter storage.
In 50 m rolls, with two continuous elastics inserted in the outer edges.

Installation instructions
1) Unroll the cover from stern to bow, maintaining a central position in relation to the boat. Leave a margin of approx. 50 cm on each side.
2) Apply two clamps at a distance of approx. 30 cm from each other and cut the used cover from the spool.
3) Remove the elastics from the inside and tie them.
4) Open the cover on the boat.
5) Pull the elastic from one side and knot it to hold the cover in tension.
6) If necessary, use the pre-cuts with reinforcements to connect the perimeter elastic transversely.