Name: V8 crane unit with remote friction band brake
Brand: Lewmar

-€683.42

The deck unit for the V8 vertical windlass Lewmar is the visible part of your windlass, the part on the deck of your boat. The headstock makes it easy to raise the chain and anchor.

⚠️ The deck unit for the V8 vertical windlass is supplied with port headstock and remote friction band brake , and does not include the other parts needed to operate a windlass, i.e. the geared motor and sprocket.

LEWMAR - V8 DECK UNIT WITH PORT HEADSTOCK

The deck unit with port headstock for the V8 windlass has the same features as the other windlasses in the V range , but is specifically designed for larger boats over 33m.

On this model, the chain outlet on the deck unit is oriented so that the chain exits from the left side of the boat and enters the chain well on the left.

What's more, it's made entirely of stainless steel, making it particularly durable and rustproof.

This model of V8 deck unit features a remote friction band brake that enables the anchor chain to be tightened or released by creating a friction band around the sprocket. It is located remotely from the deck unit, usually on the deck or in the chain well. It operates with a brake cable (not supplied) which connects the brake to the control station.

The deck unit with port headstock for V8 windlass does not include a sprocket, geared motor, relay, switch or circuit breaker.

You can also add all these accessories separately to your deck unit to obtain a complete windlass(see accessories).

This V8 vertical windlass deck unit with remote friction band brake is available in three different versions:

69000390: deck unit for V8 vertical windlass with port headstock and remote friction band brake
69000391: deck unit for V8 vertical windlass with starboard headstock and remote friction band brake
69000394: deck unit for V8 vertical windlass without port headstock and remote friction band brake

V8 DECK UNIT: IDEAL FOR LARGE VESSELS

The V8 deck unit features a choice of manual or motorized chain release.

It also features a dog clutch that allows you to switch from manual to electric mode according to mooring requirements.

You'll also find a remote hawse bar that allows you to use any chain diameter. However, we recommend using 14mm chain for the deck unit.

These bridge units can be used with either electric or hydraulic gearmotors(not supplied).

You'll find all assembly instructions in the attached PDF documentation.

ELECTRICAL SPECIFICATIONS DECK UNIT WITH PORT HEADSTOCK V8

+ WITH ELECTRIC MOTOR GEARBOX (sold separately)

	V8 2500W	V8 3500W	V8 alternating current	V8 AC
Headstock	✔️
Motor power	2500 W	3500 W	❌
Sprocket: chain (mm) (not supplied)	11, 12, 14 or 16 mm
Voltage	24 V		208 V	400 V
For boats up to	up to 33 m
Maximum pull	2273 kg	2727 kg	2200 kg	2500 kg
Working load limit	1137 kg	1364 kg	1100 kg	1250 kg
Normal current draw	150A	200A	12A	9A
Maximum lifting speed	24m/min	23m/min	15.5m/min	19m/min
Circuit breaker	200A	250A	16A	10A
Weight	101 kg	103 kg	105kg	105 kg

HYDRAULIC SPECIFICATIONS DECK UNIT WITH PORT HEADSTOCK V8

+ WITH HYDRAULIC DRIVE (sold separately)

	V8 hydraulic (165cc/rev)	V8 hydraulic (230cc/rev)	V8 High-power
Headstock	✔️
Normal pressure	50 bar
Sprocket: chain (mm) (not supplied)	11, 12, 14 or 16 mm
Flow	20-55l/min
For boats up to	up to 33 m
Maximum pull	1818kg
Maximum lifting speed	18m/min	14m/min	21m/min
Weight	84 kg		95 kg