Name: NAC-2 Pilot Pack
Brand: B&G

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 04/30/24

⚡️ Get up to €500 back on your SIMRAD or B&G equipment ⏰ From 01/04/2024 to 31/05/2024.

-€175.10

The NAC-2 Pilot Pack from B&G is a simple, high-performance autopilot base. Designed for boats up to 10m, it's a quality autopilot that's easy to install and set up.

Customize your NAC-2 pack for your boat!

B&G - NAC-2 - SIMPLE AND POWERFUL

Developed for sailing in all weather and sea conditions, the NAC-2 connects the electronic equipment needed to operate a mechanical power unit, while also allowing connection to other components such as heading and rudder angle sensors. The NAC-2 Plug & Play wiring kit is included!


	THE NAC-2 COMPUTER The NAC-2 autopilot computer is the brain of your B&G autopilot system. It contains the electronics required to operate a hydraulic steering pump, while also allowing connection to other components such as heading and rudder angle sensors. The NAC-2 is designed for boats up to 10m in length and for pumps, mechanical power units or low-current solenoid valves (8 A continuous and 16 A peak).

PRECISION-9 COMPASS The Precision-9 compass provides accurate course-following and turn-intensity information to autopilots, radars and navigation systems B&G via an NMEA 2000 connection. Thanks to an internal solid-state antenna that continuously measures movement and orientation in nine axes, the Precision-9 also provides roll and pitch data to compatible equipment. An easily adjustable mounting bracket and a single cable connection make it easy to install on any boat, including at the top of the mast for steel-hulled boats.

	TRITON² CONTROL PANEL The Triton² is a multifunction display for all B&G sensors. Its 4.1" color LCD screen with 320 x 240 pixel resolutionlets you clearly display sounder, speed, wind, depth and autopilot information . Simple, waterproofcontrols make Triton² easy to use in tricky conditions, and responsive even when your hands are wet or you're wearing gloves. supplied depending on the version chosen.

RUDDER ANGLE SENSOR The RF25N is a medium-sized rudder feedback unit with SimNet bus connectivity. It connects directly to SimNet systems for simple installation. Key features 5.5m cable Measures +/- 120 Degrees Precise and accurate; +/- 0.5 Degrees SimNet / NMEA2000 connectivity supplied depending on version selected.

	LD100 ELECTRIC LINEAR ACTUATOR The LD100 is a powerful, compact autopilot actuator, far more efficient than existing hydraulic and electromechanical linear autopilot actuators. With a thrust of 400 kg over 250 mm from center to center, it is much more powerful and is built for 24 hours a day of continuous operation, with a total weight of just 6.6 Kg. supplied according to the version chosen.