- -€26.54
-UP1 Self-Priming Electric Car Bilge Pump-M 24V
Ref.
OSC-16.166.24
The self-priming electric bilge pump- Marco UP1-M 24 V transfers fresh water or seawater at a maximum flow rate of 45 l/min. Its flexible rubber impeller can handle small debris up to 5 mm in size. Compact and IP67-rated, it is used for bilge pumping or transferring water on board.
| Article |
|
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
OSC-16.164.12
In stock in 8 to 10 days
|
|
€124.92
|
|||||||||
OSC-16.165.12
In stock in 8 to 10 days
|
|
€149.73
|
|||||||||
OSC-16.165.24
In stock in 8 to 10 days
|
|
€149.73
|
|||||||||
OSC-16.166.12
In stock in 8 to 10 days
|
|
€181.33
|
|||||||||
OSC-16.166.24
In stock in 8 to 10 days
|
|
€181.33
|
OSC-16.166.24
Data sheet
- Voltage
- 24V
- Flow
- 45 L/min
- Pressure
- 1.5 bar
Marco - -UP1 Self-Priming Electric Car Bilge Pump-M 24V
The UP1-M self-priming electric marine pump-is designed for transferring fresh water or seawater and for bilge pumping. Its flexible rubber impeller provides a maximum flow rate of 45 l/min and allows non-abrasive particles up to 5 mm in size to pass through. With IP67 protection and designed for marine environments, it can be permanently installed on board.
Powered by 24 V, it operates with hoses having an internal diameter of 25 mm and reaches a maximum pressure of 1.5 bar. Thanks to its self---priming feature, it can still be put into service even when the pump is installed at a-bove the water level.
 |
FOR TRANSFER AND DRAINAGEThe UP1-M Marco reaches a maximum flow rate of 45 l/min. It is used for transferring fresh or seawater and for draining water from a boat’s bilge.
Its flexible rubber impeller can handle non-abrasive particles up to 5 mm in size during pumping. |
KEY FEATURES:
|
BOX CONTENTS:
|
Customer Reviews (0)
No customer reviews for the moment.
Sign in to leave a review
Questions / Answers
