- -€16.74
The Striker Vivid 4CV is a 4.3" GPS echo sounder featuring the new Chirp technology. It features traditional 2D echo sounder functions and ClearVü CHIRP for sharper, better-defined images.
The integrated GPS is used to mark waypoints, create routes and display speed. The QuickDraw function lets you draw your own fishing maps. ⚠️ Unlike the EchoMAP range, Striker does not offer a map-reader function.
Read more FeaturesData sheet
- Screen size
- 4"
- Sounder technology
- 2D + Down Imaging
- Our opinion
- ★★★★★
- Range
- Striker
- Sounder power
- 300w
- Fishing area
- Small bottom
- GPS positioner function
- Yes
- Product type
- GPS sounder
GARMIN - STRIKER VIVID 4 CV - The 4.3'' GPS sounder
The echo sounder Striker Vivid 4 CV de Garmin is a GPS positioner-sounder handset with a 4.3" color display. Le Striker Vivid 4CV stands out from Striker More 4CV with 7 new color palettes.
It features traditional 2D sounder and ClearVü functions combined with CHIRP for higher-contrast, better-defined images thanks to its transom probe.
|
|
2D CHIRP TRADITIONALVisit Striker Vivid 4 provides ideal detection at depths of up to 120m without difficulty thanks to its coverage CHIRP high frequency (77/200 kHz) on a wider beam than usual. The technology CHIRP 2D allows :
|
CLEARVÜ FUNCTIONClearVü (455/800kHz) high-frequency wave technology delivers images of quasi quality-photographs of everything going on beneath the water's surface. It's so precise, you can make out structures, submerged objects and fish under the hull of your boat. All these sounder technologies are integrated into a single probe for simplified installation and use. |
![]() |
![]() |
QUICKDRAW CONTOURS FUNCTIONQuickdraw Contours software creates HD fishing maps in real time. It's now possible to create your own maps without any special knowledge. With the Striker Vivid 4CV, you can store the equivalent of 8,000 km² of Quickdraw Contours maps, with bathymetric curves displayed every 30 cm. ⚠️ Unlike the EchoMAP range, the Striker does not offer a card reader function. |
GPS ECHO SOUNDERWherever you are, the high-sensitivity GPS antenna integrates your GPS positions. So you can find your fishing grounds quickly and easily. Finally, the STRIKER Vivid 4cv displays speed in real time, so you can maintain the right speed in restricted areas, or make the most of your drift. |
![]() |
![]() |
BRIGHT, COLORFUL SONARChoose from 7 new vivid color options to see fish and structure with maximum contrast and clarity on your 4" fishfinder. |
Range presentation Striker Garmin
Which STRIKER is right for you ?
| STRIKER VIVID 4HP | STRIKER VIVID 5HP | STRIKER VIVID 7HP | STRIKER VIVID 7SV | STRIKER VIVID 9SV | |
|---|---|---|---|---|---|
| Display | 4" | 5" | 7" | 7" | 9" |
| Resolution | 272 x 480 px | 800 x 480 px | 800 x 480 px | 800 x 480 px | 800 x 480 px |
| Probe | GT20 - 4 pin | GT52 - 12 pin | |||
| Probe cable length | 6 meters |
6 meters | |||
| Power | 300W | 500W | |||
| GPS positioner | ✅ | ✅ | ✅ | ✅ | ✅ |
| CHIRP + colors Vivid | ✅ | ✅ | ✅ | ✅ | ✅ |
| ClearVü | ✅ | ✅ | ✅ | ✅ | ✅ |
| SideVü | ❌ | ❌ | ❌ | ✅ | ✅ |
| Cartography compatibility | Not compatible (see EchoMAP ) | ||||
MAIN POINTS :
|
BOX CONTENTS :
|
Accessories
Customer Reviews (1)
Questions / Answers (1)
Hi, I recently bought a Striker Vivid and I'm having a few problems connecting it to the battery correctly. The power cable supplied with the device has 4 wires of different colors: brown, blue, black and red. I'd like to know which wires I should connect to the battery's positive and negative terminals. What should-I do with the remaining 2 wires?
On the other hand, I noticed a yellow terminal on the back of the unit's screen. Could-you tell me what it does?
Hello, to connect the Striker Vivid device to the battery, you need to connect :
- The red wire to the positive (+) battery terminal
- The black wire to the negative terminal (-) of the battery
The other two wires, brown and blue, are not required for basic power supply. You can insulate them with a piece of tape to prevent them from shorting-circuiter.
These brown and blue wires are actually used for data communication between your device and another model in the same range, should you wish to use this advanced feature.
Concerning the yellow lug on the back of the device, this is the "ground lug", and must be connected to ground.
Please refer to the installation manual for wiring instructions on page 2: https://static.garmin.com/pumac/STRIKER_Vivid_5_7_9_install.pdf




