Multi Seal Tape Roll - 5m x 38mm

Features and benefits:

• Adheres to most metals and plastics
• No drying time, can be painted immediately after application
• No spray gun required, no cartridge waste
• Adapts well to irregular surfaces, contours, corners, edges, rivets and screw heads
• Clean, precise finish
• No cracking or crazing
• Extreme resistance to weather conditions
• Excellent resistance to most industrial solvents
• Excellent resistance to abrasion and high-pressure cleaning
• Remains flexible to compensate for vibration and thermal contraction/expansion

Instructions:

• Make sure the surface is free of any contamination. Use Soft Surface Cleaner and allow to dry.
• Apply the tape so that it covers the entire area to be sealed. Press down with a roller (such as a small paint roller). Remove the film (a small brush can help). Re-press the tape over the most irregular parts (rivets, screw heads, etc.).
• To ensure a strong seal, the tape must cover all points of infiltration (e.g. rivets). If necessary, KMST can be superimposed on itself. The strips should then overlap by about 2cm. Firm pressure should be exerted on all overlaps between strips so that the adhesive can create a strong joint.

Recommendations:

Can also be applied in humid environments.