- Rapid Bond White Methacrylate Adhesive, 220 ml, -, 15 minutes

Features & Benefits:

• 220-ml cartridge
• High impact resistance, ideal for structural bonding of metals, composites, and plastics
• No primer required for most metals, including steel and aluminum; minimal surface preparation
• Excellent resistance to hydrocarbons, acids, and saline solutions; wide range of applications in harsh environments
• Innovative acrylic elastomer; a structural adhesive with high filling capacity that is fast-curing and durable

Instructions:

Always use in a well-ventilated area. Mixed components generate heat; the intensity of the heat depends on the thickness of the adhesive bead.

• Sand the surface to be bonded with medium-grit sandpaper, then clean with a cloth.
• Clean with Soft Surface Cleaner
• Place the cartridge flat.
• Attach the appropriate nozzle and insert the cartridge into the gun.
• Extrude the first 20 mm of Rapid Bond and check the dispensed product to ensure it has mixed properly in the nozzle.
• Apply Rapid Bond to one surface only, and press the parts to be bonded together using only your fingers. It is not necessary to press hard.
• Apply pressure if necessary to ensure a strong bond, and make sure the assembly remains stationary while the adhesive cures. Do not apply excessive pressure, as this could reduce the thickness of the adhesive.
• Setting time: 5 to 7 minutes.
• Excess fresh adhesive can be removed with a scraper; if it is partially dry, use a sharp tool; and once dry, sand or blast it off.