- -€11.88
Rapid Bond White methacrylate glue - 220 ml - 15 minutes
Ref.
ET256
Rapid Bond, easy-to-use two-component methacrylate adhesive that bonds quickly (in 15 minutes).
Ideal for structural bonding of metals (including steel, aluminum), composites, plastics (ABS, PVC, acrylics, vinyls, polycarbonate), epoxy laminates and gel coats where high impact resistance is required.
Typical applications are for structural bonding of elements on shell, balsam or mat.
Read more
€101.90
Tax included
Public price
€113.78
Price tax excl. / DOM TOM
€84.92
ET256
Features & Benefits :
- High impact resistance, ideal for use in structural bonding of metals, bonding of composites, plastics
- Useless primer for most metals, including steel and aluminum, minimal surface preparation
- Excellent resistance to hydrocarbons, acids and saline solutions, wide range of applications in harsh environments
- Innovative acrylic elastomer, structural adhesive with high filling capacity, fast-drying and high strength
Instructions:
Always use in a well-ventilated area. Mixed components generate heat, the intensity of which depends on the thickness of the adhesive bead.
- Sand the surface to be bonded with medium-grit paper, then wipe clean with a cloth.
- Clean with Soft Surface Cleaner
- Lay cartridge flat.
- Attach the appropriate nozzle and place the cartridge in the gun.
- Extrude the first 20 mm of Rapid Bond and check the output to ensure good mixing in the nozzle.
- Apply Rapid Bond to one surface only, and press the parts to be bonded together with your fingers only. It is not necessary to press hard.
- Press if necessary to obtain a good bond, and ensure that the assembly remains stationary while the adhesive dries. Do not apply too much pressure, as this may reduce the thickness of the adhesive.
- Setting time 5 to 7 minutes.
- Excess fresh adhesive can be removed with a squeegee, if partially dry with a sharp tool and once dry by sanding or sandblasting.
Customer Reviews (0)
Questions / Answers
