-€104.10

Display - Repeater RD33

Name: Display - Repeater RD33
Brand: Furuno

The RD33 from Furuno is a simple repeater and data organizer on a 4.3" color LCD screen with high resolution and good brightness, a clear and precise display, for instantly available information.

FURUNO - RD33 - Improve the readability of your navigation data

The RD33 from Furuno offers maximum readability under all ambient conditions, whether at night or in bright sunlight (LCD brightness level: 700 cd), while data is greatly enhanced by the large characters and high resolution of the display.

The RD33 features an attractive new look, combining easy access to user functions. Thanks to its bright, high-resolution LCD screen, the RD33 offers an easy-to-read display for monitoring information from remote equipment, via an intuitive graphical user interface.

The RD33 features simultaneous monitoring alarms for water temperature, depth, speed, anchor, odometer, countdown, roll and pitch, wind speed and battery.


	VISUALIZE YOUR DATA The RD33 is a navigation data organizer that allows the operator to select the ideal way to display data from equipment such as GPS, chartplotter, radar, fishfinder, autopilot, instruments and other sensors, including engine information.

GRAPHIC INTERFACE The RD33 can display a wide range of navigation data. It can be displayed in both numerical and graphical formats. You can freely select and organize the data on screen. Choose full-screen display of a single data item, or split the screen up to a maximum of six different data windows.

	CANBUS As the RD33 is an NMEA0183 and NMEA2000 compatible device, you can use it to link the two data formats and transmit the information you require, in the format of your choice. The RD33 communicates over an NMEA0183 or NMEA200-compatible CANbus network. CANbus is a communication protocol that shares multiple data and signals via a single cable. You can simply connect any CANbus device to the basic network cable to extend your on-board network. With CANbus, identifiers are assigned to all devices, and the status of each sensor on the network can be detected. All CANbus devices can be integrated into the NMEA2000 network.