CLIPPER Duet Loch Speedo Depth sounder

NASA CLIPPER DUET DISPLAY

The CLIPPER DUET display combines a depth sounder and a log in a single unit. It displays speed and depth thanks to through-the-water sensors (included in the pack).

The display is exceptionally easy to read, thanks to a backlit screen with 7 lighting levels and 32 mm digits. Its 110 x 110 mm case is waterproof on the front for outdoor mounting.Mounting depth: 40 mm

Displays wind speed in knots, mph or km/h and distance in miles, nautical miles and km.

150KHZ DEPTH SENSOR

This pass-through probe has been specially designed for NASA MARINE's CLIPPER depth sounders. With its 150 KHzfrequency , it helps to determine the depth of the seabed down to 100m .

Supplied with 6.5 m cable and connector.

SPEEDO LOCH WITH OR WITHOUT GROMMET

The speedo loch supplied in the Pack provides reliable and accurate surface speed indication above 2 knots. It also enables you to calculate the distance covered by your boat and the water temperature.

This sensor is delivered (depending on version) with a through-hull , whose characteristics are as follows:

• Through-hull height: 63 mm
• Hole diameter: 41 mm
• Inside diameter: 31 mm

Through-hull supplied without blanking plug.

PACK CONTENTS

• 1 - Duet Clipper display
• 1 - Loch-speedo sensor
• 1 - 41mm through-hull
• 1 - Sounder sensor
• 1 - Protective cover
• 1 - PDF documentation

SENSOR CONTENTS

• 1 - Sounder sensor 16mm
• 1 - Sensor cable 6.5m

SENSOR CONTENTS

• 1 - Loch Speedo sensor
• 1 - Hull grommet 41mm (depending on model)
• 1 - 7m cable