- -€90.08
Data sheet
RAYMARINE - Wind sensor-anemometer with 30-meter cable
The wired wind sensor for masthead Raymarine is a sensor that collects all wind information and transmits it to the display. This will enable you to know a little more about the weather conditions around you.
It transmits all wind information: apparent wind speed and direction, wind speed (max), wind speed and direction.
The system measures corrected speed (VMG) when it has speed data transmitted by a SeaTalk-compatible loch-speedometer (not supplied).
![]() |
PRODUCT HIGHLIGHTS
|
INSTALLATION TIPSPreparing for installation Choose a masthead location, on a horizontal surface, free from obstructions (antennas, navigation lights, etc.) to avoid airflow disturbance. Make sure-that the chosen location allows easy access for installation and maintenance. Sensor mounting Securely fix the sensor to the top of the mast using the mounting block supplied. Make sure the sensor arm is pointing towards the front of the boat for accurate wind direction measurement. Route the 30-meter cable inside the mast if possible, or along the-mast, securing it with suitable cable ties. Avoid tight bends and areas where the cable could be pinched or damaged. Install the junction box in a dry, accessible place inside the boat. Connect the sensor wires to the corresponding terminals on the box, following the color code indicated in the documentation. |
![]() |
![]() |
COMPATIBILITY AND CONNECTIVITYThe wind sensor is compatible with many Raymarine instruments in the i60 Wind, iTC- 5, ST60+ and ST60 series. |
MAIN FEATURES :
|
BOX CONTENTS :
|
Customer Reviews (0)
Questions / Answers (2)
Bonjour, mon i60 affiche des données de vent incorrectes, j'aimerais réinitialiser ma girouette pour voir si ça remarche comment faire ?
Bonjour John, pour réinitialiser votre girouette voici les différentes étapes à suivre sur votre i60.
- Accédez au menu de calibration utilisateur : Appuyez simultanément sur les boutons Display et True/App pendant environ 2 secondes.
- Naviguez jusqu'à l'option de réinitialisation : Utilisez le bouton Display pour faire défiler les options jusqu'à ce que l'écran affiche Factory Reset.
- Effectuez la réinitialisation : Appuyez sur les boutons VMG ou Tack pour sélectionner l'option de réinitialisation, puis confirmez en appuyant sur Display.
- Quittez le menu de calibration : Maintenez enfoncés les boutons Display et True/App pendant environ 2 secondes pour revenir au mode de fonctionnement normal
Comment voir la direction du vent avec ma girouette ?
Bonjour Lionel, pour voir la direction du vent avec votre girouette, il faut que celle-ci soit correctement installée et connectée à un instrument compatible : i60 Wind, ST60/ST60+ ou un convertisseur iTC-5.