Use the Panoptix LiveScope LVS32, a two-in-one probe equipped with LiveScope Down and LiveScope Forward. These technologies offer incredible real-time images of what's going on underwater.
With your transom probe, you can choose a pole equipped with a 360° probe holder (choose your length below).
Read more Features
Data sheet
Enjoy rich, ultra-detailed images in real time with the two-in-one Panoptix LiveScope LVS32. This probe features a scanning system with LiveScope Down and LiveScope Forward functions. You can quickly switch from one to the other depending on your fishing technique. Images are easy to interpret, refreshing automatically and instantaneously even when your boat is stationary.
For razor-sharp images of the bottom, submerged structures and fish moving beneath your boat's hull, use LiveScope Forward mode. Then quickly switch to LiveScope Down mode to see what's going on beneath the boat.
The LVS32 also features traditional 2D and ClearVü view modes.
This probe is compatible with the Garmin Echomap Ultra range, and on Echomap Plus/GPSmap (from 7" upwards).
|
|
PANOPTIX LIVESCOPE DOWNLiveScope Down technology provides real-time, easy-to-interpret and highly detailed images of submerged structures, lures and fish under your boat at depths of up to 61 meters. You can use LiveScope Down mode when your boat is stationary. Beam width: 20°x135° |
PANOPTIX LIVESCOPE FORWARDLiveScope Forward mode is a remarkable tool for spotting fish and fishing from the front of your boat. You can observe structures and fish at depths of up to 60 meters, even when your boat is stationary. Beam width: 20°x135° |
 |
|
|
POWERFUL AND EASYDespite its great power and many features, the Garmin Panoptix LiveScope LVS32 is nevertheless very easy to install. In fact, the plug-and-play connector makes it easy to set up as soon as the product is delivered. All you need to do is read the installation instructions carefully, and the welder will be ready for use in no time. Note that an icon is displayed on your plotter screen to show you the orientation of the Panoptix LiveScope probe in relation to your boat. Calibration will be required. |
KEY POINTS
|
CONTENTS TA PROBE
|
CONTENTS TR PROBE
|
Accessories
Customer Reviews (5)
Questions / Answers (4)
Does the LVS 32 work-t-in deep water?
Hello Samuel, the maximum depth range of the LVS32 is 61 meters with the Down and Forward modes of the probe.
At-- do I need a special bracket to attach the LiveScope LVS32 probe?
Hello Grégoire, to attach the LiveScope LVS32 probe, a special bracket is required. The choice of bracket depends on the type of installation and the viewing mode you prefer.
Is the LVS32-compatible with all Garmin handsets?
Hello Yann, the sounder Garmin Panoptix LiveScope LVS32 is not compatible with all handsets Garmin. It requires connection via the GLS 10 sonar module and use of the Garmin marine network.
You can find out which devices are compatible with the LVS32 in our installation guide.
What's the difference between the LVS32 Forward, Down and Perspective modes?
Hi Julie, Forward mode shows what's happening in front of the boat, Down mode shows what's happening under the boat, and Perspective mode gives you a panoramic view "from above" your boat.
