FRENCHDAYS ➡️ -25€ from 200€ ⭐ -50€ from 400€ ⭐ -75€ from 600€ ➡️ Code: FRENCH24 ⏰ Ends 07/05/24, on a marked selection

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 15 may 2024

-€273.89

🐓 FRENCH DAYS

Comptoir Nautique offers you acompleteSleipner Side-Power SE50 electric bow thruster pack , ready for installation on your powerboat. It is designed for motorboats from 8 to 11m* with a thrust power of 50-62 kg and a diameter of 140 mm.

The pack includes an electric thruster, a tunnel, a joystick control panel, a control cable, a circuit breaker, a fuse holder, a fuse and a battery. Detailed pack composition below.

SIDE-POWER - SE50 ELECTRIC BOW THRUSTER COMPLETE PACK - FOR POWERBOATS

With the aim of making it easier for you to choose an electric bow thruster for your motorboat, Comptoir Nautique offers you a complete pack so that you have everything you need to install it on your boat.

The pack includes a Sleipner SE50 Ø140 mm 12V electric bow thruster with 50-62 kg thrust and accessories.


	What is a bow thruster? A bow thruster enhances the boating experience by making maneuvering easier. Docking your boat or leaving the dock becomes much simpler. For maximum efficiency, the bow thruster's propeller needs to be installed as far forward as possible (to get the best leverage), while keeping it sufficiently submerged to maximize propulsion and avoid churning the air. This is where the difficulty lies, because on both powerboats and sailboats, the forward part of the hull is often only slightly immersed in the water. The positioning of a thruster is therefore an essential feature. Whatever the choice of thruster, installation requires intervention on the boat's structure. An error in positioning can have serious consequences. If you're planning to do it yourself, contact a specialist for advice.

SE50 Ø140 mm package Tunnel (inside Ø x length x thickness): 1x: 140 x 1500 x 5 mm Control panel : 1x: Joystick control panel 4-wire control cable: 1x: 7 m cable Manual circuit breaker with emergency stop: 1x: 125A circuit breaker Fuse holder: 1x: Fuse holder with protective cover Fuse: 1x: ANL 250A fuse Battery Optima: 1x : Battery 12V 55Ah - 765A (cables not included) Please note, if you have a Fly type motorboat (with 2 separate helm stations), Comptoir Nautique recommends the additional addition of a Y connector, cable and joystick control panel. This will enable the bow thruster to be controlled from both helm stations.

Features of the SE50 Ø140 electric bow thruster for powerboats

	SE50 package
Recommended boat size	From 8 to 11 m
Electric bow thruster model	SE50
Tunnel diameter	Ø140
Power	3.2 HP
Thrust	50 - 62 kg
Voltage	12 V

Comptoir Nautique however, we recommend oversizing the thruster power in relation to the size of your boat.

*These data are provided for guidance only, and must take into account the boat's specific characteristics (weight, construction materials, hull type, dunnage, current and wind conditions in your cruising area). If you have any questions about which package would best suit your boat configuration, please don't hesitate to contact us by e-mail (contact@comptoirnautique.com).