SE80 Ø185 mm electric bow thruster pack - motorboat - 10 to 15 m

What is a bow thruster?

A bow thruster enhances the boating experience by making maneuvering easier. Docking your boat or leaving the dock becomes much simpler.

For maximum efficiency, the bow thruster's propeller needs to be installed as far forward as possible (to get the best leverage), while keeping it sufficiently submerged to maximize propulsion and avoid churning the air.

This is where the difficulty lies, because on both powerboats and sailboats, the forward part of the hull is often only slightly immersed in the water. The positioning of a thruster is therefore an essential feature.

Whatever the choice of thruster, installation requires intervention on the boat's structure. An error in positioning can have serious consequences. If you're planning to do it yourself, contact a specialist for advice.

SE80 Ø185 mm package

• Tunnel ( inside Ø x length x thickness): 1x: 185 x 1500 x 6 mm
• Control panel : 1x: Joystick control panel
• 4-wire control cable: 1x: 12 m cable
• Manual circuit breaker with emergency stop: 1x: 250A circuit breaker
• Fuse holder: 1x: Fuse holder with protective cover
• Fuse: 1x: ANL 425A fuse
• Battery Optima: 1x : Battery 12V 75Ah - 975A (cables not included)

Please note, if you have a Fly type motorboat (with 2 separate helm stations), Comptoir Nautique recommends the additional addition of a Y connector, cable and joystick control panel. This will enable the bow thruster to be controlled from both helm stations.

MAIN POINTS :

• Complete package
• 12V voltage
• Ready to install
• Easy to maneuver
• High thrust power
• For powerboats from 10 to 15 m

BOX CONTENTS :

• 1 - SE80 Ø185 mm bow thruster - 10 to 15 m motorboat
• 1 - Tunnel
• 1 - Control panel
• 1 - Control cable
• 1 - Circuit breaker
• 1 - Fuse
• 1 - Battery
• 1 - PDF documentation