-€474.40

🐓 FRENCH DAYS

Comptoir Nautique offers you a complete Sleipner Side-Power SE100 electric bow thruster pack, ready for installation on your powerboat. It is designed for powerboats from 12 to 17m* with a thrust power of 100-116 kg and a diameter of 185 mm.

The pack includes an electric thruster, a tunnel, a joystick control panel, a control cable, a circuit breaker, a fuse holder, a fuse and two batteries. Detailed pack composition below.

SIDE-POWER - SE100 ELECTRIC BOW THRUSTER COMPLETE PACK - FOR POWERBOATS

With the aim of making it easier for you to choose an electric bow thruster for your motorboat, Comptoir Nautique offers you a complete pack so that you have everything you need to install it on your boat.

The pack includes a Sleipner SE100 Ø185 mm 12V electric bow thruster with a thrust of 100-116 kg and accessories.


	What is a bow thruster? A bow thruster enhances the boating experience by making maneuvering easier. Docking your boat or leaving the dock becomes much simpler. For maximum efficiency, the bow thruster's propeller needs to be installed as far forward as possible (to get the best leverage), while keeping it sufficiently submerged to maximize propulsion and avoid churning the air. This is where the difficulty lies, because on both powerboats and sailboats, the forward part of the hull is often only slightly immersed in the water. The positioning of a thruster is therefore an essential feature. Whatever the choice of thruster, installation requires intervention on the boat's structure. An error in positioning can have serious consequences. If you're planning to do it yourself, contact a specialist for advice.

SE100 Ø185 mm package Tunnel (inside Ø x length x thickness): 1x: 185 x 1500 x 6 mm Control panel : 1x: Joystick control panel 4-wire control cable: 1x: 12 m cable Manual circuit breaker with emergency stop: 1x: 250A circuit breaker Fuse holder: 1x: Fuse holder with protective cover Fuse: 1x: ANL 500A fuse Battery Optima: 2x : Battery 12V 55Ah - 765A (cables not included) Please note, if you have a Fly type motorboat (with 2 separate helm stations), Comptoir Nautique recommends the additional addition of a Y connector, cable and joystick control panel. This will enable the bow thruster to be controlled from both helm stations.

Features of the SE100 Ø185 electric bow thruster for powerboats

	SE100 package
Recommended boat size*	12 to 17 m
Electric bow thruster model	SE100
Tunnel diameter	Ø185
Power	8.4 HP
Thrust	100 - 116 kg
Voltage	12 V

Comptoir Nautique however, we recommend oversizing the thruster power in relation to the size of your boat.

*These data are provided for guidance only, and must take into account the boat's specific characteristics (weight, construction materials, hull type, dunnage, current and wind in your sailing area). If you have any questions about which package would best suit your boat configuration, please don't hesitate to contact us by e-mail (contact@comptoirnautique.com).