-€35.79

Solid deck panel Raw aluminum skylight

Name: Solid deck panel Raw aluminum skylight
Brand: Plastimo
Rating: 5 (1 reviews)

Ref. 67923

Plastimo Lanterneau solid deck hatches in raw aluminum combine excellent watertightness, superb design and easy assembly. Available in a range of sizes, these deck hatches are compatible with standard production boat sizes . However, they can also be used on other means of transport, such as motorhomes, vans or camper vans...

PLASTIMO - LANTERN DECK PANELS ALU BRUT - SOLID, WATERTIGHT, AESTHETIC

Lanterneau solid deck hatches from Plastimo are watertight with a great design. This deck panel is solid, unglazed, in raw aluminum. It's ideal for boat decks where there's a lot of traffic, or where you want strength rather than brightness . Designed in raw aluminum, this deck panel can be painted to give your boat, motorhome or camper van a uniform look, while remaining resistant to weather, temperature changes and corrosion.

They're also ideal for ventilating the interior of a boat or van. These deck panels should be installed on a flat surface with a tolerance of ± 1 mm. Their thinness (10 mm) when closed means they won't get in the way on the deck of a boat, or allow converted vans to pass under certain barriers if they're fixed to the roof.


	Adjustable opening height Lanterneau de Plastimo deck hatches feature two compasses that allow you to adjust the hatch opening to suit your needs. Simply disengage the scissors in the twinkling of an eye to adjust. It can have a small opening of 19 mm, which is perfect for boats with a teak deck. If you wish, these compasses can be detached from the sash for a 180° opening . There are also two handles with excellent grip. These handles, located on the inside, incorporate an effective locking catch that prevents the deck hatch from being opened from the outside . What's more, there's no need to operate the lock from the outside. ⚠️ Sizes 30, 40, 60 and 70 are available with two handles and two compasses* .*

A solid, watertight and aesthetic design Full-deck skylight panels from Plastimo full-deck skylight panels are designed with a large-section, single-body aluminum sash for excellent rigidity and attractive design. This results in even pressure on the joints for a perfect seal . Here, the "glazing" is in solid, unfinished aluminum . This provides great strength , should your boat deck be subject to heavy traffic. The other advantage of this solid, raw cladding is that you can paint it any color you like. Technical specifications : 100% Aluminum (except handles and compass) Invisible hinges Low sash height, up to 19 mm for teak decks 10 mm panel thickness Telescopic compass Aluminum hinges Mounting height below deck: 15 mm Radius 42.5 mm

	On-board installation Lanterneau 's deck hatches Plastimo are CE-certified for coastal and offshore use. These screw-on hatches, with their flat profile and compass opening, comply with European regulations for on-board installation. They can therefore be installed in zones II, III & IV, deck, roof and cockpit areas . European standard CE 94/25 of June 16, 1996 defines zones as follows: Zone I: hull above the waterline Zone II: deck, coachroof, cockpit, transom Zone IIB: hull area not belonging to Zone I Zone III: superstructure, deck and cockpit Zone IV: cockpit and deck, aft face of superstructure Please note thatLanterneau deck hatch sizes Plastimo 60 and 70 are approved as escape hatches . However, they must be installed in Zone IIB!

Deck hatch dimensions and size guide Plastimo

References	67923	68782	67924	67925
Sizes	30	40	60	70
External dimensions (in mm)	517 x 387	481 x 481	567 x 567	687 x 687
Inside dimensions (in mm)	455 x 325	419 x 419	505 x 505	625 x 625
Cut-out dimensions (in mm)	457 x 327	421 x 421	507 x 507	627 x 627
Radius (mm)	42.5	42.5	42.5	42.5
Weight (kg)	5.2	5.8	7.4	10.2