- -€0.91
Striker and Echomap power cable 4x/5x/6x - 4 pins
Ref.
010-12199-04
The Garmin 4-pin power/data cable is a cable for Garmin EchoMap 42DV/52DV and EchoMap Plus 42CV/62CV fishfinders and the entire Striker series from Garmin.
It will enable you to have a second power supply, for a secondary station, an emergency power supply or simply to power your device elsewhere than on your boat.
€19.92
Public price
€20.83
Price tax excl. / DOM TOM
€19.92
010-12199-04
Customer Reviews (0)
Questions / Answers (1)
Hi, I recently bought a Striker Vivid and I'm having a few problems connecting it to the battery correctly. The power cable supplied with the device has 4 wires of different colors: brown, blue, black and red. I'd like to know which wires I should connect to the battery's positive and negative terminals. What should-I do with the remaining 2 wires?
On the other hand, I noticed a yellow terminal on the back of the unit's screen. Could-you tell me what it does?
Bernard, the 31/05/2024
Hello, to connect the Striker Vivid device to the battery, you need to connect :
- The red wire to the positive (+) battery terminal
- The black wire to the negative terminal (-) of the battery
The other two wires, brown and blue, are not required for basic power supply. You can insulate them with a piece of tape to prevent them from shorting-circuiter.
These brown and blue wires are actually used for data communication between your device and another model in the same range, should you wish to use this advanced feature.
Concerning the yellow lug on the back of the device, this is the "ground lug", and must be connected to ground.
Please refer to the installation manual for wiring instructions on page 2: https://static.garmin.com/pumac/STRIKER_Vivid_5_7_9_install.pdf
Comptoir Nautique Team
