Name: SH-D03 probe Internal mounting 83/200kHz
Brand: Humminbird

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 04/30/24

⚡️ Get up to €500 back on your SIMRAD or B&G equipment ⏰ From 01/04/2024 to 31/05/2024.

-€13.10

Sensor Humminbird dual-frequency 83/200 kHz to be glued inside. Easy installation, without drilling the shell, by adhesive bonding to the inside of the single-layer fiberglass shell.

HUMMINBIRD - SH-D03 - XAP-9-20 - INDOOR GLUE-ON TRANSDUCER

The SH-D03 probe Humminbird is ideal when you want to benefit from the sounder function without taking the boat out of the water or drilling holes. It has an operating frequency of 83 to 200 kHz, a sweep width of 20° to 60 degrees and can be mounted on a midship beam angle of over 15 degrees. For use with all Humminbird single-beam and dual-beam models.

This sensor does not have a temperature function and will require special programming on your unit, which can be carried out simply by referring to the manual.

Installation of this sensor is very easy, as it features an adjustable mitre angle. There's no need for a clamp, as the probe is glued directly to the bottom of the hull. Supplied with a bag of epoxy glue for installation. Fiberglass thickness must not exceed 14.7 mm (5.8 inches). Not recommended for double hulls.

6 m cable
ABS plastic
Number of beams: 2
1-year manufacturer's warranty
Dual frequency 83/200kHz
Target separation: 6.5 cm
Total scan width: 60
Easy installation: no drilling

Accessories