Spirit 1.0 Evo rear electric motor with remote control

Easy to install and transport

The Spirit 1.0 Evo engine has been designed to deliver ease of transport and a quick installation. What's more, it's quiet, environmentally-friendly and powerful.

With its weight from 10.2 kg and its compact design (550 x 457 x 1150 mm), this motor is easy to transport with just one hand and can be stored without taking up much space.

The quick-release clamp makes it possible to attach installation and dismantling in seconds ,no additional tools required, thanks to its innovative "one Click" fastening system.

It is also equipped with a-circuit that shuts down the motor immediately if necessary for greater safety.

Powerful built-in battery

The Spirit 1.0 Evo engine combines simplicity and technology for a simplified cruising experience.

Intelligent management of your lithium battery-integrated ion 1276 Wh optimizes energy efficiency, prolonging the motor's autonomy while making it easy to monitor its condition in real time via a Digital display.

With its floating design, the Spirit battery is unsinkable .IP67-rated, it operates in all conditions. Lightweight and compact, it weighs only 8.7 kg ,which makes it easy to transport.

Choosing the right tree for your boat

It is crucial to choose the right shaft length for the Spirit 1.0 Evo motor to suit your boat. If it's too short, the propeller won't be submerged enough. Comptoir Nautique recommends :

• Measure the distance between the bow and the waterline.
• Add 10 cm to the waterline measurement for rough water fishing.
• Add 30 cm to the waterline measurement to steer a hand-operated motor while standing in the boat.

HYDROGENERATING TECHNOLOGY

The Spirit 1.0 Evo engine, unlike the Spirit 1.0 Plus is the very first off-electric dashboard with hydrogeneration system, the battery is recharged when the engine is running. The ePropulsion brand is a pioneer in off-road motor innovation-and is dedicated to sustainable, environmentally-friendly navigation.

This function is activated (after 10 knots, the motor enters protection mode and load power no longer increases).

WIRELESS REMOTE CONTROL

Wireless control with digital display displays motor and battery status information. You'll find data on voltage and remaining battery capacity, your real-time speed, distance covered, and the power used by the motor.

The handle is located on the left side of the block, along with the cutter-circuit at the bottom. Operation is very intuitive: push to move forward or accelerate, pull to move backwards or decelerate.

The wireless connection works if the motor and control unit are relatively close together. For greater distances, a data cable (optional) will be required.

The Evo wireless controller is powered by an integrated lithium battery. It can be recharged either by solar power from the solar panel on the front or by a wired connection.

Introducing the Spirit 1.0 Evo engine

Installing the remote control kit

MAIN POINTS :

• Brushless motor
• 4 tilt angles
• Built-in lithium battery
• Anti-corrosion coating
• Wireless remote control
• 2-year warranty and 1-year battery
• Sunlight-readable LCD digital display

BOX CONTENTS :

• 1 - Spirit 1.0 Evo S electric motor
• 1 - Built-in rechargeable battery
• 1 - EVO remote control
• 1 - AC charger
• 2 - Cuts-circuit
• 2 - Locking pins
• 1 - PDF documentation