AIS700 transponder

FEATURES

• Integrated antenna splitter simplifies installation with existing VHF antenna
• Silent mode switchable by software or hardware for enhanced security, as required
• Latest SO-TDMA network for longer range and faster performance
• Full AIS transmission and reception for enhanced situational awareness and safety

INSTALLATION TIPS

Install the box in a dry, well-ventilated area, free from interference. Connect-to a dedicated VHF antenna, or use a splitter if you share the antenna with the VHF radio. Connect the 12V power supply with a 3A fuse, and use cables with a good cross-section.

AIS 700 connects easily to a Raymarine chartplotter via SeaTalkNG, or to a PC via USB for configuration. Don't forget to install the GPS antenna supplied, essential for transmitting AIS.

Before use, configure the device with your MMSI and boat data using the ProAIS2 software. This is a one-time operation. Correct installation guarantees reliable operation and improved visibility at sea.

For further information, please refer to the installation instructions at the bottom of this page.

CHARACTERISTICS :

• Power consumption
• Power supply: 12 and 24V
• Waterproofing: IPX6 & IPX7
• Reception channels: 72
• Interface: NMEA0183 and NMEA2000

BOX CONTENTS :

• 1 - AIS transmitter-class B receiver
• 1 - AIS700 integrated VHF antenna splitter
• 1 - GNSS antenna (GPS)
• 1 - 2 m power/data cable
• 1 - 1 m VHF radio cable
• 1 - DeviceNet adapter cable-SeaTalkng 1 m
• 1 - PDF documentation