SE80 Ø185 mm electric bow thruster package - Sailboat - 10 to 15 m

What is a bow thruster?

A bow thruster enhances the boating experience by making maneuvering easier. Docking your boat or leaving the dock becomes much simpler.

For maximum efficiency, the bow thruster's propeller needs to be installed as far forward as possible (to get the best leverage), while keeping it sufficiently submerged to maximize propulsion and avoid churning the air.

This is where the difficulty lies, because on both sailboats and speedboats, the forward part of the hull is often only slightly immersed in the water. The positioning of a thruster is therefore an essential feature.

Whatever the choice of thruster, installation requires work on the boat's structure. An error in positioning can have serious consequences. If you're planning to do it yourself, contact a specialist for advice.

SE80 Ø185 mm package

• Tunnel ( inside Ø x length x thickness): 1x: 185 x 1500 x 6 mm
• Control panel : 1x: Touch-sensitive control panel
• 4-wire control cable: 1x: 18 m cable
• Manual circuit breaker with emergency stop: 1x: 250A circuit breaker
• Fuse holder: 1x: Fuse holder with protective cover
• Fuse: 1x: ANL 425A fuse
• Battery Optima: 1x : Battery 12V 75Ah - 975A (cables not included)

MAIN POINTS :

• Complete package
• 12V voltage
• Ready to install
• Easy to maneuver
• For sailboats from 10 to 15 m
• High thrust power

BOX CONTENTS :

• 1 - SE80 Ø185 mm bow thruster for 10 to 15m sailboats
• 1 - Tunnel
• 1 - Control panel
• 1 - Control cable
• 1 - Circuit breaker
• 1 - Fuse
• 1 - Battery
• 1 - PDF documentation