OnDeck Hub system

Track, monitor & control your boat

Thanks to this remote monitoring system Garmin OnDeck, you'll be the first to find out if a safety sensor has been triggered or if your boat has been moved. The built-in GPS sensor is updated every 15 or 30 minutes (depending on power status) and sends SMS alerts if your boat leaves the virtual guard zone.

You can also get updatesAbout your boat's battery status, activity in the bilge, shore power, temperature changes... Simply configure alarm notifications in the ActiveCaptain application.

Finally, you can control your boat from a distance.Manage up to 5 remote relay switches directly from the OnDeck hub Garmin and the ActiveCaptain application for the most important on-board systems, including battery chargers, icemakers and much more.

You can also control as many switches as you wish with support for NMEA 2000 impulse or remote switches via EmpirBus digital switching or other third-party interfaces.

Keep an eye on the boat wherever you are

You'll always be connected to your boat, because the Garmin OnDeck Hub uses worldwide 3G/4G coverage and more. Once you've downloaded and installed the ActiveCaptain application on your compatible smartphone, you'll be able to manage your boatconfiguring alarm notifications, take the controlling your boat and much more..

You can also store data. You can safe data collection of the boat using the Garmin OnDeck Hub and store them in the cloud up to 30 days.

This monitoring system Garmin OnDeck Hub integrates perfectly and completely with your marine electronic equipment (multifunction display via network Garmin Marine Network, engines, NMEA 2000® sensors).

Finally, a internal battery backup to access the Garmin OnDeck for 48 hours even if the boat battery is discharged or the power supply disconnected.

MAIN POINTS :

• Data storage
• Alarm configuration
• Up to 5 switches
• Remote management and control
• ActiveCaptain application management
• 48-hour battery backup
• Compatibility with your electronic equipment

BOX CONTENTS :

• 1 - OnDeck HubGarmin
• 1 - OnDeck safety sensor
• 1 - OnDeck temperature sensor
• 1 - OnDeck shore power sensor
• 1 - OnDeck 12 V relay switch c.c.
• 1 - Power cable
• 1 - Input/output data cable (19-pin), sensor/relay output
• 1 - Network cable Garmin Marine Network
• 1 - NMEA 2000 branch cable
• 1 - NMEA 2000 T-connector
• 1 - PDF documentation