-€22.76

Barb for CPX4 - 8 mm ISO

Name: Barb for CPX4 - 8 mm ISO
Brand: Lewmar

The sprocket is an essential component in the operation of your windlass and plays a very important role in the anchor lifting and lowering process. It is an integral part of the deck unit and enables the anchor chain to be lifted from your boat. The chain wraps around the sprocket, preventing tangles and knots .

The sprocket is compatible with the CPX4 12V and 24V windlass, which can accommodate 8mm ISO 4565 diameter chain or 12 to 14mm diameter rope.

It can also be used on CPX4 deck units to complete your deck unit.

LEWMAR - Barb for CPX4 - 8 mm ISO 4565

Mooring chains for boats are subject to standards which regulate their manufacture. There are two types of standard: ISO 4565 is a more general international standard, while DIN 766 is a more specific German standard, focusing in particular on steel anchor chains.

ISO 4565 chains have wider and longer links than DIN 766 chains, which implies differences in dimensions , weight and strength .

Here, the sprocket can accommodate 8mm ISO 4565 chain .

The CPX4 sprocket is available in three different versions:

68001063 : 8mm ISO 4565
68001065 : 10mm ISO 4565
68001066 : 12mm ISO 4565

To find out the exact dimensions of the chain your sprocket can support, please refer to the diagram in the photo and the corresponding letters in the legend.

Chain (D) : Ø 8 mm - ISO 4565
Rope : Ø 12-14 mm
P: 24 mm
W : 28,8 mm