- -€62.10
81205305
Converter Mac Plus 12V/24-30A - IP23
Specifications battery charger | ||
Battery temperature sensor | yes, included | |
Battery voltage sense | yes | |
General specifications | ||
Status indicator | yes, 3-color LED | |
Communication protocol | MasterBus, CZone & NMEA 2000 | |
Output voltage | 20-30 V | |
Nominal output voltage | 24 V | |
Output voltage stabilisation | 2 % at extremes of temperatures, load and input | |
Output voltage ripple (peak peak) | max. 1 % | |
Max. output power | 725 W | |
Nominal output power | 675 W | |
Max. output current | 30 A | |
Output charge current (3-step mode) | 30 A | |
Nominal input voltage | 12 V | |
Input voltage range | 10-16 V | |
Max. input current | 50 A | |
Galvanic isolation | no | |
Voltage limited | yes | |
Efficiency | > 95 % (at nom. input voltage, full load); peak 97 | |
Parallel configuration | yes | |
Alarm contact | yes, through MasterBus | |
MasterBus powering | no | |
Engine run signal input | yes (active high/active low) | |
DIP switches | yes, for basic setup | |
Dimensions, hxwxd | 255 x 165 x 66 mm 10.0 x 6.5 x 2.6 inch |
|
Weight | 2 kg 4.4 lb |
|
Compliance | CE, E-Mark, SAE J1171 & ISO 8846 Ignition Protected | |
Technical specifications | ||
No-load consumption | ||
Charge characteristic | 3-traps+ | |
Battery types | flooded, Gel, AGM, spiral, Lithium Ion, traction, user defined | |
3-Step charge option | yes (DIP switch settings) | |
DC consumption | ||
Connections | 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on/off, temperature sensor, voltage measurement | |
Temperature range (ambient temp.) | -25 °C to 60 °C; derating > 40 |
|
Cooling | natural cooling | |
Protection degree | IP23 | |
Protections | overload, over temperature, DC short circuit, reversed polarity (fuse) | |
MasterBus compatible | yes |
Customer Reviews (0)
Questions / Answers