J1939 to NMEA 2000 gateway

These single-sensor gateways are designed to digitize and make reliable the information from an analog sensor, in order to display it remotely on one or more NMEA 2000®-compatible displays. Available in 4 variants: resistive, voltage, LIN and J1939, they can be easily configured via the NFC Interface or using our NMEA 2000 configuration tool.

Wireless configuration

If your smartphone is NFC-enabled, a free app (Android or iOs) will enable you to intuitively select the sensor type and configure it.

• Thanks to the integration of a passive chip and an NFC antenna, the gateway can be configured even when not powered up.
• This means it can be configured directly in the store, while still in its blister pack!

Common parameters: sensor type, assignment, alarm threshold.

Link Up gateway connections:

Output
On all gateways, the output connector is a standardized 5-pin Micro-C M12 NMEA2000 connector. The gateway's internal isolation separates the NMEA backbone power supply from that of the gateway.

Input
Link Up resistive or J1939 gateways: AMP 2-pole waterproof connector. Link Up IBS gateways: dedicated harness for connecting the IBS gateway (Hirshmann connector) to the IBS sensor on the battery (M8 Faston-type lug).