- -€2,444.10
Seafari VERSATILE 140 L/h 220V compact watermaker
Ref.
PU459
Produce fresh drinking water on board your boat with the compact Seafari Versatile watermaker from HRO Systems . Here in 220V version, this Seafari Versatile watermaker has a freshwater production capacity of 140 liters per hour .
With its space-saving design, it's perfect for boats with limited space . Membrane access is available on both sides for easy maintenance. It's also extremely quiet, smooth running and features complete vibration isolation. Microprocessor-controlled electronics provide state-of-the-art technology and reliability .
The Seafari Versatile watermaker features a fail-safe water bypass valve that allows potable water to enter the storage tanks. High-rejection , high-performance, commercial-grade, chemical-resistant membranes are used.
This watermaker is available with one or two membranes . The two-membrane version is recommended for use in warm waters . The membrane blocks not only salt crystals, but also bacteria and certain viruses. The warmer the water, the greater the volume produced at constant pressure, but the less fine the filtration. In cold water, on the other hand, capacity decreases. The more membranes are added in series, the greater the watermaker's output.
Technical specifications of the Seafari Versatile 140 L/H watermaker fromHRO Systems:
- Models: 900-1 (1 membrane) / 900-2 (2 membranes)
- Production capacity: 140 L/h - 3405 L/day
- Voltage: 220V/1/50Hz
- Power consumption: 15A
- Dimensions with 1 membrane W x D x H: 1192 x 381 x 331 mm
- Dimensions with 2 membranes W x D x H: 711 x 381 x 331 mm
- Weight 1 membrane: 69 kg
- Weight 2 diaphragms: 72 kg
€19,791.90
Tax included
Public price
€22,236.00
Price tax excl. / DOM TOM
€16,493.25
PU459
Data sheet
- Voltage
- 220V
- Flow
- 140 L/h
HRO SYSTEMS - SEAFARI VERSATILE 140 L/H 220V COMPACT WATERMAKER
Additional features of the Seafari Versatile compact watermaker:
- Salt rejection (chloride ion) : Minimum 99.2%, average 99.4%.
- Product water temperature : Ambient water temperature
- Salinity monitoring : The system's salinity control components give a continuous reading in micromhos per cubic centimeter, are temperature-compensated, and are of fail-safe design.
- Salinity range : Designed for use in seawater up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm).
- Temperature range : Min. 33°F - 5°C / Max. 122°F - 50°C
- Reverse osmosis membrane : High-rejection/high-efficiency, aromatic tri-polyamide, spiral-wound, single-pass, thin-film composite reverse osmosis membrane element.
- Chlorine tolerance : 0.1 ppm
- PH range : 3-11 (typical seawater pH is 8)
System pressure :
- Minimum: 6 psi / .41 bar / .42 Kg/cm2
- Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
System operation:
- Seawater at 35,000 ppm and 77°F / 25°C
- Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish water varies with ppm)
External water connections :
- Supply inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
- Brine discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
- Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std.)
Accessories
Customer Reviews (0)
Questions / Answers
