Watermaker Seafari MINI 55 L/h 220V

HRO SYSTEMS - SEAFARI MINI WATERMAKER 55 L/H 220V

The Seafari Mini watermaker HRO Systems is the perfect solution for boats with limited space.

Smaller than a 75-liter water tank, it boasts a high freshwater and drinking water production capacity of up to 55 liters per hour! Designed to fit anywhere, this osmosis unit is designed for sailboats and small motorboats, and will be the perfect sea companion for the solo sailor.

Featuring a simple, push-button interface, the Seafari Mini watermaker is controlled by a control panel. With an unlimited number of functions at your disposal, semi-automatic functions, 6 indicator lights toshow system status, automatic weekly freshwater rinse and sequential starting of electric motors with manual control, this watermaker is ideal for small motorboats and sailboats.

Technical specifications of the watermaker HRO Systems Seafari Mini 55 L/h 220V :

• Salt rejection (chloride ion): Minimum 99.2%, Average 99.4%.
• Salinity monitoring: the system's salinity control components give a continuous reading in micromhos per cubic centimeter, are temperature-compensated, and are of fail-safe design.
• Salinity range: designed for use in seawater up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm).
• Temperature range: Min. 33°F / 5°C - Max. 122°F / 50°C
• Reverse osmosis membrane: High-rejection/high-efficiency, aromatic tri-polyamide, spiral-wound, single-pass, thin-film composite reverse osmosis membrane element.
• Chlorine tolerance: 0.1 ppm
• PH range: 3-11 (typical seawater pH is 8)

System pressure :

• Minimum: 6 psi / .41 bar / .42 Kg/cm2
• Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2

System operation:

• Seawater at 35,000 ppm and 77° F / 25° C
• Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish water varies with ppm)
• Supply inlet: 1/2″ MNPT (national male thread, American standard).
• Brine discharge: 1/4″ FNPT (national male thread, US standard).
• Product: 1/4″ FNPT (National Female Pipe Thread, Std. Amer.)