-€17.45

Barbet for CPX1/2/3 - 6mm ISO

Name: Barbet for CPX1/2/3 - 6mm ISO
Brand: Lewmar

The sprocket is an essential component in the operation of your windlass and plays a very important role in the anchor lifting and lowering process. It is an integral part of the deck unit and enables the anchor chain to be lifted from your boat. The chain wraps around the sprocket, preventing tangles and knots .

The sprocket is compatible with the CPX1, CPX2 12V or 24V and CPX3 12V or 24V windlasses, which can accommodate 6mm ISO 4565 diameter chain or 12 to 14mm diameter rope.

It can also be used on CPX1 and CPX2/3 deck units to complete your deck unit.

LEWMAR - Barb for CPX1/2/3 - 6 mm ISO 4565

Mooring chains for boats are subject to standards which regulate their manufacture. There are two types of standard: ISO 4565 is a more general international standard, while DIN 766 is a more specific German standard, focusing in particular on steel anchor chains.

ISO 4565 chains have wider and longer links than DIN 766 chains, which implies differences in dimensions , weight and strength .

Here, the sprocket can accommodate 6mm ISO 4565 chain .

The sprocket for CPX1/2/3 is available in three different versions:

68001047 : 6mm ISO 4565
68001049 : 8mm ISO 4565
68001051 : 10mm ISO 4565

To find out the exact dimensions of the chain your sprocket can support, please refer to the diagram in the photo and the corresponding letters in the legend.

Chain : Ø 6 mm - ISO 4565
Rope : Ø 12-14 mm
P: 18 mm
W : 21,6 mm