Name: Skylla i 24V 1+1 output battery charger
Brand: Victron Energy

-€121.86

Skylla-i 24V chargers are highly resistant to outdoor conditions (heat, humidity). It optimizes battery charging time, and is smaller and lighter than similar models.

With Battery Safe mode, you'll be protected from damage caused by outgassing from your charger.

VICTRON ENERGY - SKYLLA I 24V 1+1 OUTPUTS - BUILT TO LAST

Skylla-i chargers optimize charging time by varying the absorption charge time according to the rate of discharge of your batteries. The chargers are compatible with a DC power supply and can be used as a direct DC power supply without batteries or large capacitors.

The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to around 4 A and with a slightly lower output voltage, is designed to supply a starter battery bank.


	THE COMPLETE CHARGER Battery Safemode: prevents premature deterioration of batteries during heavy charging. This charging mode injects a high current associated with a high absorption voltage, but limits voltage progression once the gassing voltage is reached Standby mode: activates if the battery is not used for 24 hours. To prevent premature battery ageing, the voltage is read weekly, thus preventing electrolyte stratification and battery sulfation.

FOR LONGER LIFE To improve the quality of charging, Skylla-i chargers are equipped with 2 probes: The first monitors battery temperature to prevent overcharging. The Skylla-i charger automatically adjusts its charge according to the measured temperature. A second sensor measures battery terminal voltage. This prevents errors due to losses in the main wiring.

	SKYLLA-I 24V - 80A	SKYLLA-I 24V - 100A
Input voltage (VAC)	230 V
Max. AC input current @180VAC	16 A	20 A
Battery capacity	400 - 800 Ah	500 - 1000 Ah
Remote On/Off port	Yes (can be connected to a lithium-ion BMS)
Degree of protection	IP21
Charging algorithm	3 steps