Victron digital multicord panel

The system combines a pure sine-wave inverter and a sophisticated battery charger with adaptable search technology. Also compatible with lithium batteries.
Two AC outputs : in the absence of shore power or generator power, if connected, the unit steps in to provide uninterrupted power.
The second output is only available when AC power is available. Devices that risk discharging the battery, such as boilers, must be connected to this output.
Three-phase parallel function : up to 6 devices can be connected in parallel. Up to 3 units of the same type can be connected to the three-phase supply. Up to 6 series of 3 units can be connected in parallel.
Power control : the multiplus is very powerful and can absorb a large amount of shore power or generator power. The multicontrol panel (14.270.32) allows you to keep the absorbed power under control by setting a maximum limit. The multiplus will respect the limit and only use the remaining energy to charge the battery.
Power assist : if a power peak is required for a limited time, the multiplus will compensate for the insufficient power supply by supplying energy from the battery.
The microprocessor-controlled battery charger implements a 4-stage bulk-absorption-floot-storage charging system of the Phoenix/Skylla type.
- Aluminum structure
- Protection against short-circuit, overload, battery overvoltage or undervoltage, very high ripple frequency, etc.