INDOOR polyethylene nautical blanket 4 x 50 m

Polyethylene tarpaulin to protect boats in winter storage.
In 50 m rolls, with two continuous elastics inserted in the outer edges.

Installation instructions
1) Unroll the cover from stern to bow, maintaining a central position in relation to the boat. Leave a margin of approx. 50 cm on each side.
2) Apply two clamps at a distance of approx. 30 cm from each other and cut the used cover from the spool.
3) Remove the elastics from the inside and tie-them.
4) Open the cover on the boat.
5) Pull the elastic from one side and knot-it to hold the cover in tension.
6) If necessary, use the pre-cut-with reinforcements to connect the perimeter elastic transversely.