V2 switch with external control for flaps Lenco

SWITCH WITH EXTERNAL CONTROL UNIT

The V2 LED switch Lenco is available in 2 models , the LC246 for all single-cylinder flaps (1 cylinder per shovel) and the LC241 for double-cylinder flaps (e.g. super strong double cylinder) with 2 cylinders per shovel.

This range of V2 switches , unlike the ISK range , can be installed with less drilling depth, thanks to its external control box .

V2 Lenco switches are therefore ideal for users wishing to install the system in a dashboard of 5.5cm depth (compared with 10.5cm for the ISK range)

SIMPLIFIED INSTALLATION

FLAPS V2 switches feature an external control unit . This means you can separate the control interface from the control unit.

For installation, all you need is a hole saw (maximum diameter5.24cm ) and a drill/screwdriver to complete the installation of the V2 switch .

MAIN POINTS :

• Waterproof
• 2 buttons
• Easy installation
• 12 or 24 V power supply
• With or without LED (depending on model)
• For 1 or 2 cylinder flaps (depending on model)
• Automatic flap retraction when battery is switched off.
• Separate control box (depth required: 5.5cm)

CONTENTS OF BOX :

• 1 - V2 flap switch (depending on model)
• 1 - External control box
• 1 - PDF documentation