Name: Flybridge ISK dual station switch kit for flaps Lenco
Brand: Lenco

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 04/30/24

⚡️ Get up to €500 back on your SIMRAD or B&G equipment ⏰ From 01/04/2024 to 31/05/2024.

-€23.30

The Flybridge switch kit is a secondary switch that connects to the main one and is used in another part of the boat or in the 2nd cockpit. This kit can't be used on its own: use it in conjunction with an ISK switch to add a secondary control station.

The ISK secondary switch is available in 4 models.

LC242: with flap position LED and 6m extension lead
LC244: with flap position LED and 9m extension cable
LC247: without LED, with 6-meter extension cable
LC248: without LED with 9-meter extension cable

Flap position control can therefore be achieved with a standard switch (without LED) or with an LED switch, which enables the position of the shovels to be known at all times. This range of secondary switches is compatible with ISK main switches only (with integrated management box)

⚠️ Not compatible with V2 switch

LENCO - ISK FLYBRIDGE DUAL STATION KIT - SECONDARY SWITCH

The ISK secondary kit for flaps Lenco allows quick and easy control of your flaps from the flybridge. At the touch of a button, you can independently manage your flaps, raising or lowering it.


	SECONDARY SWITCH FOR FLYBRIDGE CABIN The ISK Lenco LED or LED-FREE secondary switch with 6m or 9m extension cable is compatible with any ISK main switch (not to be confused with the V2 range) The ISK second station switch allows the addition of a control box on the flybridge or in any other part of the boat.

THE ISK SWITCH KIT Choose the model that's right for you: - With LED for permanent indication of flap position and extension lead - Without LED and with extension lead. Take a sufficiently long extension cable (6m or 9m for this type of kit) depending on the location of your cockpit. (You'll find 16m extension leads here)

How to choose your secondary switch kit?

	LC242	LC244	LC247	LC248	123FB20-V2	123FB30-V2
LED indicating flap position	✅	✅	❌	❌	✅	✅
For which switch?	ISK	ISK	ISK	ISK	V2	V2
Extension length	6 meters	9 meters	6 meters	9 meters	6 meters	9 meters
Mounting diameter	5.24 cm
Installation depth	~6.5cm
Interface dimension	7x7 cm