V2 switch with external control for flaps Lenco

SWITCH WITH EXTERNAL CONTROL UNIT

The V2 LED switch Lenco is available in 2 models, the LC246 for all single-cylinder flaps (1 cylinder per shovel) and the LC241 for double-cylinder flaps (e.g. super strong double cylinder) with 2 cylinders per shovel.

This range of V2 switches, unlike the ISK range, can be installed with less drilling depth, thanks to its external control box.

V2 Lenco switches are therefore ideal for users wishing to install the system in a dashboard of 5.5cm depth (compared with 10.5cm for the ISK range)

SIMPLIFIED INSTALLATION

FLAPS V2 switches feature an external control unit. This means you can separate the control interface from the control unit.

For installation, all you need is a hole saw (maximum diameter5.24cm ) and a drill/screwdriver to complete the installation of the V2 switch.

MAIN POINTS :

• Waterproof
• 2 buttons
• Easy installation
• 12 or 24 V power supply
• With or without LED (depending on model)
• For 1 or 2 cylinder flaps (depending on model)
• Automatic flap retraction when battery is switched off.
• Separate control box (depth required: 5.5cm)

CONTENTS OF BOX :

• 1 - V2 flap switch (depending on model)
• 1 - External control box
• 1 - PDF documentation