-€133.10

Compact SP cooling unit with "O" evaporator

Name: Compact SP cooling unit with "O" evaporator
Brand: Indel Webasto

The Compact SP 2051 water-cooled chiller maintains low temperatures and preserves food and beverages on your boat.

It works like a conventional refrigerator, cooling a space up to 125 L in volume, such as a crate, box or hermetically sealed compartment.

INDEL WEBASTO - Compact chiller SP 2051 with O-evaporator 125 L

The Compact SP 2051 chiller Indel Webasto with 125 L water cooling consists of 3 inseparable components : a compressor, an "O" evaporator and a thermostat .

The choice of your cooling unit will depend on a number of criteria: the location of the cooler, the positioning of the cooling unit (flat or on a wall), the available dimensions, accessibility to the system for maintenance, and the volume to be cooled .

All these criteria are essential to ensure optimum chiller efficiency and an installation tailored to your needs.

The Compact SP chiller with "O" evaporator is available in several versions to best suit your needs:

IG150 ➔ Compact SP chiller with "O" evaporator 2051 125 L

IG151 ➔ Compact SP chiller with "O" evaporator 2351 150 L

IG152 ➔ Compact SP chiller with"O" evaporator 200 L


	GROUNDBREAKING TECHNOLOGY The Compact SP chiller is cooled by seawater . It's the water-cooled condenser that removes the heat from the mechanism. No need for pumps and fans to remove heat. As a result, battery consumption is reduced and the chiller is quieter. The SP system takes advantage of the boat's natural movements to pump seawater and cool the refrigerant . A special fitting in the sink drain allows the water to circulate freely, using every movement of the water to pump and exchange heat efficiently. What's more, as this fitting is positioned away from the center of gravity, even a small movement of the boat is enough to activate pumping, resulting in continuous hot water withdrawal and cold water suction while preventing dirt build-up. The "O" evaporator is often used around the inside walls of the refrigerator. It's perfect for providing stable, even cold distribution.

AN INFINITE REFRIGERATION CYCLE The SP 2051 Compact chiller is specifically designed to be powered by seawater. Here's how the system works The system draws in seawater through an intake located beneath the boat's hull The usually gaseous refrigerant is compressed in the compressor. This increases its pressure and temperature The refrigerant circulates through a condenser, releasing its heat into the seawater previously drawn in . The refrigerant changes from a gas to a liquid. The refrigerant passes through an expansion valve where its pressure drops, cooling its temperature. It then becomes a very cold, low-pressure mixture of liquid and gas This mixture circulates through the evaporator , which absorbs heat from the compartment, cooling the space. By absorbing the heat, the refrigerant evaporates and becomes a low-pressure gas once again The cycle starts again when the compressor sucks in the gaseous refrigerant These steps are perpetually repeated to cool your food. The seawater used for condensation is generally discharged outside the boat after absorbing heat from the refrigerant.

SPECIFICATIONS SP 2051 COMPACT CHILLER WITH WATER COOLING 125 L

Maximum cooling volume	125 L
Evaporator type	O" type
Compressor type	BD35 F
Weight	15 kg
Evaporator dimensions LxWxH	240 x 210 x 85mm
Compressor dimensions LxHxD	280 x 160 x 175 mm
Maximum power consumption	2,5 A
Average power consumption	0,6 A
Thermostat type	Refrigeration(freezing optional)