INDEL WEBASTO - ITC+ 3201 air-cooled chiller 100L
The ITC+ 3201 chiller Indel Webasto with 100 L air cooling consists of 3 inseparable components : a compressor, a eutectic plate and a thermostat .
The choice of your cooling unit will depend on a number of criteria: the location of the cooler, the positioning of the cooling unit (flat or on a wall), the available dimensions, accessibility to the system for maintenance, the volume to be cooled and the ventilation of the space .
All these criteria are essential to ensure optimum chiller efficiency and an installation tailored to your needs.
The ITC+ air-cooled chiller is available in two versions to best suit your needs:
IG200 ➔ ITC+ 3201 air-cooled chiller 100 L
IG201 ➔ ITC+ 3701 air-cooled chiller 150 L
|
 |
AN INTELLIGENT COMBINATION
The ITC+ (eutectic plate & ITC thermostat) air-cooled chiller is particularly suitable for boats without a constant power source and where access to water is impractical.
It keeps food fresh without the need for a continuous power supply, thanks to eutectic liquid that can store cold, saving battery power.
The intelligent system detects when surplus energy is available to "recharge " the eutectic plate with cold. Conversely, when excess power is no longer available, the system reduces its consumption .
Thanks to the ITC intelligent thermostat and temperature sensor , energy consumption can be optimized by controlling compressor operation and adjusting the cooling power actually required.
|
|
AN INFINITE REFRIGERATION CYCLE
The ITC+ 3201 chiller is specifically designed to be powered by ambient air. Here's how the system works
- A fan draws in ambient air through grilles on the compressor
- The air passes through a heat exchanger which compresses the gaseous refrigerant, increasing its temperature and pressure.
- The refrigerant circulates through a condenser, releasing its heat into the ambient air . This condenses the refrigerant into a high-pressure liquid
- The refrigerant passes through an expansion valve where its pressure drops, cooling its temperature. It then becomes a very cold, low-pressure mixture of liquid and gas
- This mixture circulates inside the eutectic plates. The evaporator absorbs the heat from the eutectic mixture, freezing it and allowing the refrigerant to evaporate.
This heat transfer process reduces the temperature inside the compartment, while the eutectic solution stores the cold .
- The refrigerant, in its gaseous state, returns to the compressor to repeat the cycle indefinitely.
|
 |
FEATURES ITC+ 3201 AIR-COOLED CHILLER 100 L
| Maximum cooling volume |
100 L |
| Maximum storage volume |
35 L |
| Evaporator type |
Eutectic plate |
Compressor type
|
BD35 F |
| Weight |
14 kg |
| Plate volume |
2 L |
| Plate dimensions LxWxH |
300 x 210 x 60 mm |
| Compressor dimensions LxHxD |
280 x 160 x 175 mm |
| Maximum power consumption |
5 A |
| Average power consumption |
0,4 A |
| Thermostat type |
ITC (refrigeration + freezing) |
MAIN POINTS :
- Air cooling
- BD35 F compressor
- Quick and easy installation
- Model U100X035A17161AA
- Evaporator with cold accumulator
- Intelligent thermostat temperature control
|
BOX CONTENTS :
- 1 - Danfoss BD35 F compressor
- 1 - ASU eutectic plate
- 1 - Flexible connection 3m
- 1 - ITC thermostat
- 1 - Fixing bracket
- 1 - Screw kit
- 1 - PDF documentation
|
mm - Evaporator
